HP Kayak XA-s 02xx HP Kayak XA-s PC Workstation - User Guide for Minitower Mod - Page 16

Connecting to a Network

Get HP Kayak XA-s 02xx PDF manuals and user guides View all HP Kayak XA-s 02xx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

geron.bk : geron-1.fb4 Page 4 Sunday, March 22, 1998 5:03 AM 1 Setting Up and Using Your PC Workstation Connecting to a Network Connecting to a Network Your PC Workstation has a 10BT/100TX LAN interface adapter. The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations and automatically detects which network type is being used. 1 Connect the RJ-45 plug on your network cable to the LAN connector on the LAN Adapter. Push the plug into the connector until the plug clicks into place. The board shown here is a combined SCSI/LAN board. Some models do not have the SCSI option. 2 Attach the other end of the LAN cable to a hub (or into a wall socket that is connected to a hub). Let your Network Administrator know that you are connecting your PC Workstation to the network. For further instructions on configuring your network connection, refer to "Configuring Your Network Connection" on page 95. Refer also to the online Network Administrator's Guide (preloaded onto your PC Workstation) for further instructions on setting up your PC Workstation for a LAN connection. 4 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
1
Setting Up and Using Your PC Workstation
Connecting to a Network
4
English
Connecting to a Network
Your PC Workstation has a 10BT/100TX LAN interface adapter.
The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations
and automatically detects which network type is being used.
1
Connect the RJ-45 plug on your network cable to the LAN connector
on the LAN Adapter. Push the plug into the connector until the plug
clicks into place.
2
Attach the other end of the LAN cable to a hub (or into a wall socket
that is connected to a hub).
Let your Network Administrator know that you are connecting your
PC Workstation to the network.
For further instructions on configuring your network connection,
refer
to “Configuring Your Network Connection” on page 95.
Refer also to the online
Network Administrator’s Guide
(preloaded
onto your PC Workstation) for further instructions on setting up your
PC Workstation for a LAN connection.
The board shown here is a
combined SCSI/LAN board.
Some models do not have
the SCSI option.
geron.bk : geron-1.fb4
Page 4
Sunday, March 22, 1998
5:03 AM