HP Kayak XA-s 02xx HP Kayak XA-s PC Workstation - User Guide for Minitower Mod - Page 58
Installing Accessory Boards
View all HP Kayak XA-s 02xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
geron.bk : geron-2.fb4 Page 46 Sunday, March 22, 1998 5:03 AM 2 How to Install Accessories Inside Your PC Workstation Installing Accessory Boards CAUTION NOTE Installing Accessory Boards Static electricity can damage electronic components. Turn OFF all equipment. Don't let your clothes touch the accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing the accessory from the bag. Handle the accessory as little as possible and with care. The PC Workstation has the following accessory board slots: • Slot AT 2 (the bottom slot) for full-length 16-bit ISA boards • Slot AT 1/PCI 4 for either a 16-bit ISA board or a full-length 32-bit PCI board • Slot PCI 3 for a full-length 32-bit PCI board • Slot PCI 2 for a full-length 32-bit PCI board • Slot PCI 1 for a full-length 32-bit PCI board • Slot AGP for the video adapter board Installing the Board 1 Disconnect the computer's power cord and any LAN connection or telecommunications cable. PCI boards are configured automatically when installed in the PC Workstation. 2 Remove the computer's cover ( "Removing and Replacing the Cover", on page 23) and carefully place the PC Workstation on its side. 3 Find an empty slot. refer to "System Board Switches", on page 91. to identify the location of the slot type you want to use (ISA or PCI). Some boards may have preferred locations and special installation instructions detailed in their manuals. 46 English