HP LaserJet Pro 100 HP LaserJet Pro 100 Color MFP M175 - User Guide - Page 160
Print failure, Cool-down mode, Remove shipping material from rear door, Resend Upgrade
View all HP LaserJet Pro 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Control panel message Description Recommended action Print failure The product experienced an internal communication error. 1. Turn off the power by using the power switch. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Wait at least 30 seconds, and then turn on the power and wait for the product to initialize. 4. If the error persists, contact HP. See www.hp.com/support/ LJColorMFPM175 or the support flyer that came in the product box. Printing... Cool-down mode The product is too hot to continue printing at The product will pause longer between normal speed. printed pages until it cools down. Overheating occurs when the product lacks air ventilation or when it prints continuously for a long period of time. To prevent overheating, place the product in a wellventilated area, and divide very large print jobs into smaller print jobs. Remove shipping material from rear door Shipping material remains on the back of the product. Open the rear door and remove all shipping material. Resend Upgrade A firmware upgrade was interrupted. Resend the upgrade file to the product. Scanner Error X The product experienced a general scanner 1. Turn off the power by using the power error. switch. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Wait at least 30 seconds, and then turn on the power and wait for the product to initialize. Sensor Error The product experienced a paper sensor error. 4. If the error persists, contact HP. See www.hp.com/support/ LJColorMFPM175 or the support flyer that came in the product box. 1. Turn off the power by using the power switch. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Wait at least 30 seconds, and then turn on the power and wait for the product to initialize. Settings cleared The product has cleared job settings. 4. If the error persists, contact HP. See www.hp.com/support/ LJColorMFPM175 or the support flyer that came in the product box. Re-enter any appropriate job settings. 146 Chapter 13 Solve problems ENWW