HP OmniBook 600C fw 02.00.02-1 and sw 06.00.02 HAFM Server Omnibook - Installa - Page 27
HAFM Server Configuration, Connecting the HAFM Server to a LAN
View all HP OmniBook 600C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
7 HAFM Server Configuration This chapter describes how to connect the HAFM server to the LAN and configure its network information. Connecting the HAFM Server to a LAN You can connect the HAFM server to the single customer-supplied private corporate Ethernet LAN with or without an HP-supplied Ethernet hub. Optionally, you can configure a separate dedicated private LAN between the HAFM server and the switch products that it manages. The optional private LAN requires the installation of an additional customer-supplied PCMCIA NIC in the HAFM server. The dedicated private LAN precludes the use of the HP OpenView Storage Area Manager application. To connect the HAFM server to the LAN, complete the following steps: 1. Connect one end of the Ethernet patch cable (supplied with the HAFM server) to the rightmost RJ-45 connector at the rear of the HAFM server (labeled Public LAN Interface, as shown in Figure 7-1. Public refers to sharing the LAN with devices other than the managed switch products). HAFM server installation guide 7-1