HP OmniBook xe3-gc HP OmniBook Notebook PC XE3 Series - Reference Guide - Page 102
PC card problems
View all HP OmniBook xe3-gc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Solving Problems with Your Computer Troubleshooting Techniques 3. Select the One-Touch buttons tab. 4. Click on the button of the key you want to reconfigure. 5. Select the application or website you want associated with the button. (See "To configure a One-Touch button" for more detail.) 6. Click Done, then OK. If the onscreen display does not appear when pressing a One-Touch button • Check that the Onscreen Display is enabled. 1. Click Start, Settings, Control Panel. 2. Double-click Keyboard. 3. Select the One-Touch buttons tab. 4. Click Change Onscreen Display. 5. Check Enable if it is not checked. 6. Click Done, then OK. PC card problems If the notebook doesn't recognize a PC card • Remove and reinsert the PC card. • If the card requires an IRQ, check that there is one available. Look in Device Manager, Properties, Interrupt Request (IRQ). • Check the HP notebook website for information about supported PC cards. • Try the card in another computer. • Reboot the computer. If an I/O card stops communicating properly • The card may have been reset if the computer in on standby or turned off. Exit any applications, then remove and reinsert the card. 102 Reference Guide