HP OmniBook xe3-gf HP Omnibook Notebook PC XE3-GF - Reference Guide - Page 77
To use an external monitor - wireless
View all HP OmniBook xe3-gf manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Making Connections Connecting External Components In Windows 98, you need to install the Direct Cable Connection software first: 1. From Control Panel, click Add/Remove Programs. 2. Click Windows Setup, Communications, and select Direct Cable Connection. See the Windows online help for instructions about how to use Direct Cable Connection or Wireless Link. To use an external monitor You can connect your computer to an external monitor and then use either display-or both displays at once. To connect an external monitor 1. Click Start, Shut Down, Shut down (Windows 98 or 2000) or Start, Turn Off Computer, Turn Off (Windows XP). 2. Connect the monitor cable from the monitor to the VGA port on the rear of the computer or on the optional port replicator. 3. Connect the monitor to a power source and turn it on. 4. Press the blue standby button to turn on the computer. To switch the display to the external monitor • Close the computer lid. OR • Press Fn+F5 to cycle through the display options: notebook display, external monitor, both. OR • Click Start, Programs, HP Display Settings, HP Display Settings (Windows 98 or 2000), or Start, All Programs, Hewlett-Packard, Notebook, HP Display Settings, HP Display Settings (Windows XP). To adjust monitor resolution 1. Click Start, Settings, Control Panel, then double-click Display (Windows 98 or 2000), or click Start, Control Panel, Appearance and Themes, Display (Windows XP). 2. On the Settings tab, adjust the Screen area. Reference Guide 77