HP Scitex FB910 HP Scitex FB910 Printer Series - User Manual - Page 106
Clean the Media Drive Belt and Encoder, Media Drive Belt
View all HP Scitex FB910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Clean the Media Drive Belt and Encoder The printer relies on high-resolution encoders for high quality output. The proper functioning of the encoder wheel that reads the position of the media drive belt is particularly important. If the encoder wheel and belt become dirty, lose contact with each other, or become damaged, banding in prints or printer malfunction may occur. Clean the media drive belt every day, and the encoder wheel once per week. Caution The media drive belt encoder is a high-precision electronic instrument that is easily damaged. Use extreme caution when cleaning and handling the encoder assembly. Media Drive Belt 1. Remove any media from the media drive belt and tables. 2. Stand at the user end of the printer, next to the control panel. 3. Hold a clean, lint-free cloth against the media drive belt, just below the level of the input table. If the belt has been printed on, moisten the cloth with isopropyl alcohol. 4. On the Front Page screen of the control panel, press the Media Forward/Backward buttons to move the belt until it is clean. If necessary, remoisten the cloth or allow cured ink on the belt to soak with isopropyl alcohol before wiping dry. 6-4 Clean the Media Drive Belt and Encoder