HP Scitex FB910 HP Scitex FB910 Printer Series - User Manual - Page 118
Tools, Maintenance., Reset Reservoir Filters., Close the endcap cabinet door
View all HP Scitex FB910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
5. Position the new filter into the retaining strap. The filter's label has an arrow that indicates the direction of flow. Install the filter with the arrow pointing up. 6. Connect the hoses to the top and bottom of the filter, and tighten the connectors. 7. Secure the filter to the retaining strap with a zip tie. 8. Close the endcap cabinet door, or replace the access panel. 9. On the Front Page screen, press the Tools key. 10. Press Maintenance. 11. Press Reset Reservoir Filters. If you are not replacing the entire set of filters, you can reset the count for an individual filter. 6-16 Replace Ink Filters
6-16
Replace Ink Filters
5.
Position the new filter into the retaining strap.
The filter’s label has an arrow that indicates the direction of
flow. Install the filter with the arrow pointing
up
.
6.
Connect the hoses to the top and bottom of the filter, and
tighten the connectors.
7.
Secure the filter to the retaining strap with a zip tie.
8.
Close the endcap cabinet door, or replace the access panel.
9.
On the Front Page screen, press the
Tools
key.
10.
Press
Maintenance.
11.
Press
Reset Reservoir Filters.
If you are not replacing the entire set of filters, you can reset
the count for an individual filter.