HP Scitex FB910 HP Scitex FB910 Printer Series - User Manual - Page 113
Recover Missing InkJets, Purge Type, High Volume, Printer Settings >, Perform an Air Purge
View all HP Scitex FB910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Recover Missing Ink Jets The printer is designed to operate with a certain number of missing (clogged or misfiring) inkjets that are substituted by other working jets, without affecting print speed. If your daily startup process (as described in "Daily Startup" on page 1-6) fails to revive all missing jets, you can try the following advanced jet recovery measures. Tip You may wish to wear gloves during this procedure to prevent staining your hands with ink. 1. Set the Purge Type to High Volume (Printer Settings > Purge Type). 2. Select Perform an Air Purge from the menu (Tools > Maintenance > Perform an Air Purge). 3. Select a color, a combination of colors, or all colors to purge. 4. Press the ! (Proceed) key. The printer purges the color(s) that you selected. Caution Purged printheads must be dabbed (not wiped) before printing or moving the carriage. Moving the carriage with wet printheads will cause uncured (wet) ink to drop onto the media drive belt and louvers. The ink will smoke if it contacts heated louvers. 5. Open the output-side door of the user-end cabinet, or carefully wheel the cabinet away from the printer. 6. Use a lint-free cloth to dab the printheads, not a paper towel, which could shed fibers that could clog the inkjets. 7. The carriage moves out of the wiping station. 8. From the Front Page screen, press the Prime Bars key. • If all jets (indicated by a printed line) are working, the printer is ready to print. Recover Missing Ink Jets 6-11