HP Scitex FB910 HP Scitex FB910 Printer Series - User Manual - Page 120
Operating Tips, Front gt; Print Mode, Front gt; Media, Wizard
View all HP Scitex FB910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Operating Tips You can extend the life of the UV lamp bulbs as follows: • If the head height is significantly above the standard height over the media, the curing effectiveness of the lamps will be reduced. • When the lamps do not cure output sufficiently in Billboard Quality Mode, switch to Production Quality Mode. When the lamps do not cure the output in Production Mode, switch to High Quality Mode (Front Page > Print Mode). • If the lamps are not curing the ink with the lamps set to Low, increase the setting to Medium or High (Front Page > Media Wizard). • Check the quartz windows and clean them if necessary (see "Clean the Quartz Windows" on page 6-20 for instructions). If the lamps are still not curing printed output after taking these steps, contact Technical Services for assistance in diagnosing the problem. The technician may be able to suggest further steps to extend the service life of the bulbs. 6-18 UV Lamp Operation and Maintenance