HP Scitex FB910 HP Scitex FB910 Printer Series - User Manual - Page 16
Recover Jets Part 1, Purge, Prime Bars, Tools > Maintenance > Print
View all HP Scitex FB910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Recover Jets Part 1 6. Press the Purge key on the control panel to purge the printheads. Follow the instructions on the control panel screen. The printer will detect when you open and close the endcap access door, and remove and reinstall the drip tray, to determine when you have completed certain steps in the procedure. 7. Press the Prime Bars key on the control panel to print the Prime Bars. • If all jets (indicated by a printed line) are working, the printer is ready to print. • If there are any missing jets, print the Prime Bars again three or four times until all jets are working. 8. If any missing jets are present after printing the Prime Bars, print a Recover Jets Pattern (Tools > Maintenance > Print Recover Jets Pattern). This is a special pattern designed to recover missing inkjets. After printing this pattern, the prime bars are printed again. • If all jets (indicated by a printed line) are working, the printer is ready to print. • If there are any missing jets (inducated by no printed line), print the Recover Jets Pattern again. If this shows any missing jets, proceed to the next step, "Recover Jets Part 2" on page 1-10. 1-8 Basic Printer Operations