HP Scitex FB910 HP Scitex FB910 Printer Series - User Manual - Page 78
Manual Jet Mapping, Calibrate, Manual Calibrations
View all HP Scitex FB910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Manual Jet Mapping Jets that are missing or misfiring are usually detected by the AutoJet calibration. Alternatively, you can map out jets manually using the Manual Jet Mapping function. You may want to manually map weak or misdirected jets that AutoJet does not substitute. Tip AutoJet is the automatic version of this calibration (see "AutoJet" on page 4-3 for details). Tip For best results, print the prime bars and purge the printheads as necessary to ensure the maximum number of working jets. See "Checking Jet Health" on page 2-23 for instructions. 1. Press the Calibrate key from the Front Page screen, then press Manual Calibrations in the menu. 2. Press Manual Jet Mapping in the menu. The control panel displays this message: Print Jet Map? If you have a calibration pattern from a recent print, you can use it to calibrate the heads. Press ( (Cancel) and go to the next step. Otherwise, press !. 4-16 Manual Calibrations