HP Scitex FB910 HP Scitex FB910 Printer Series - User Manual - Page 35
Proceed, tion about UV lamp life, see Replacing UV Lamp Bulbs
View all HP Scitex FB910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
5. Configure the UV lamps operation by touching the "High," "Low," or "Shuttered" options for the leading and trailing lamps. Buttons will appear or disappear to present only valid combinations (for example, you cannot set both lamps to Shuttered). • For standard media listed in the Media Wizard, leave the lamp settings at their default values, then adjust as needed. • Faster print modes require higher lamp settings to ensure sufficient curing. • If the ink is not curing, increase the setting. The lamps will gradually lose curing effectiveness, so increasing the setting eventually may become necessary. (For infomation about UV lamp life, see "Replacing UV Lamp Bulbs" on page 6-19.) • If the media is wrinkling or warping from the heat of the lamps, lower the setting. 6. Press Proceed to save the settings and return to the Front Page, or Cancel to restore the previous print mode settings. Configure Printing 2-5