HP Vectra VEi8 HP Vectra VEi7, User's Guide - Page 31
Replacing an Accessory Board
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3 Replacing Hardware Components Replacing an Accessory Board Replacing an Accessory Board 1 Remove the computer's cover (described in this chapter). 2 Remove the screw that holds the old board in place. 3 Hold the old board firmly and carefully pull it out. 4 Aligning the new board carefully, slide it into position, then press it firmly into the slot and tighten the retaining screw. 5 Replace the cover (described in this chapter). English 27
English
27
3
Replacing Hardware Components
Replacing an Accessory Board
Replacing an Accessory Board
1
Remove the computer’s cover (described in this chapter).
2
Remove the screw that holds the old board in place.
3
Hold the old board firmly and carefully pull it out.
4
Aligning the new board carefully, slide it into position, then press it
firmly into the slot and tighten the retaining screw.
5
Replace the cover (described in this chapter).