HP Vectra VEi8 HP Vectra VEi7, User's Guide - Page 42
Replacing the System Board
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3 Replacing Hardware Components Replacing the System Board Replacing the System Board NOTE HP does not support system board upgrades. This information is provided to help you replace a defective unit with a system board provided by HP support services. 1 Remove the computer's cover (described in this chapter). 2 Remove the airflow guide (described in this chapter). 3 Remove the tray containing the floppy disk and hard disk drives to allow easy access to the system board (see "Replacing the Hard Disk Drive" and "Replacing the Floppy Drive"). 4 Remove the main memory, processor and any accessory boards from the old system board (described in this chapter). You will also need to disconnect any cables attached to the board. 5 Remove the six screws that hold the board in place and lift the board out, being careful not to damage the PC's rear connectors. 38 English