HP dx7510 Service Reference Guide: HP Compaq dx7510/dx7518 Business PC - Page 49
Opening the Slot Cover Lock, Removing an Expansion Slot Cover
View all HP dx7510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
4. On the rear of the computer, a slot cover lock secures the expansion card brackets in place. Remove the screw from the slot cover lock then slide the slot cover lock up to remove it from the chassis. Figure 6-8 Opening the Slot Cover Lock 5. Before installing an expansion card, remove the expansion slot cover or the existing expansion card. NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card. a. If you are installing an expansion card in a vacant socket, you must use a flatblade screwdriver to pry out the metal shield on the rear panel that covers the expansion slot. Be sure to remove the appropriate shield for the expansion card you are installing. Figure 6-9 Removing an Expansion Slot Cover Expansion Cards 41