HP dx7510 Service Reference Guide: HP Compaq dx7510/dx7518 Business PC - Page 59
Removing an External 3.5-inch Drive, CAUTION
View all HP dx7510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
8. Connect the power cable (1) and data cable (2) to the rear of the optical drive. Figure 6-20 Connecting the Power and Data Cables 9. Replace the front bezel and access panel. 10. Reconnect the power cord and turn on the computer. 11. Lock any security devices that were disengaged when the access panel was removed. The system automatically recognizes the drive and reconfigures the computer. Removing an External 3.5-inch Drive CAUTION: All removable media should be taken out of a drive before removing the drive from the computer. NOTE: The 3.5-inch drive bay may contain a diskette drive or a media card reader. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 32). 2. Remove the access panel (Access Panel on page 33). 3. Lay the computer on its side with the front facing toward you. 4. Remove the front bezel (Front Bezel on page 34). Drives 51