HP dx7510 Service Reference Guide: HP Compaq dx7510/dx7518 Business PC - Page 70

Speaker, Preparation for Disassembly, on Access Panel, Front Bezel

Get HP dx7510 - Microtower PC PDF manuals and user guides View all HP dx7510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

Speaker 1. Prepare the computer for disassembly (Preparation for Disassembly on page 32). 2. Remove the access panel (Access Panel on page 33). 3. Lay the computer on its side with the front facing toward you. 4. Remove the front bezel (Front Bezel on page 34). 5. Disconnect the speaker cable from the system board. 6. Remove the three screws that secure the speaker to the inside of the chassis, and then lift it up and out of the chassis while threading the cable through hard drive cage bracket. To install the speaker, reverse the removal procedure. Be sure to route the cable back through the hard drive cage bracket and the clip on the side of the optical drive cage. 62 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
Speaker
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
32
).
2.
Remove the access panel (
Access Panel
on page
33
).
3.
Lay the computer on its side with the front facing toward you.
4.
Remove the front bezel (
Front Bezel
on page
34
).
5.
Disconnect the speaker cable from the system board.
6.
Remove the three screws that secure the speaker to the inside of the chassis, and then lift it up
and out of the chassis while threading the cable through hard drive cage bracket.
To install the speaker, reverse the removal procedure.
Be sure to route the cable back through the hard drive cage bracket and the clip on the side of the optical
drive cage.
62
Chapter 6
Removal and Replacement Procedures Microtower (MT) Chassis