Honeywell NX4S1 User Guide - Page 58
Table 2-8, Cards > Add Cards Field Descriptions
View all Honeywell NX4S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Configuring via the Web Server Configuring the System - Use limits - Card holder note 1 - Card holder note 2 - Access levels Steps: Use the field descriptions in the following table to complete the card fields and click Add Card(s): Table 2-8: Cards > Add Cards Field Descriptions Field Description Card Number(s) Specifies the unique number by which the card holder will be identified. A card number is required. Card Holder Name Identifies the card holder. A card holder first and last name is required. Each name can have up to 25 characters. Card Type Specifies whether the card holder is a Supervisor, Employee, or a VIP. A temporary (Temp) flag can be set for each type of card holder. When the Temp flag is enabled, the expiration date becomes an active field. Note that the Temp box is active when the panel is configured for visitor cards in Configuration > System > General (see "General Tab" on page 14). A card type is required. PIN Specifies the Personal Identification Number (PIN) for the card holder. A PIN is optional; however, if the door reader is configured to require PIN identification (see "Reader Tab" on page 31), then you must create a PIN for the card holder here. The PIN number has a maximum of six digits. Trace Sends an alarm message to the alarm monitor whenever a card with trace enabled is presented at a reader. This feature provides a trace of the cardholder's path through the facility. Expiration Date Specifies the date that a temporary employee's card is de-activated. Use Limits Specifies the number of times a card may be read at a card reader to which it has valid access. Specify the number-of-uses limit as the number of times access may be granted. Note 1 Provides a user-defined field. See Configuring the System, page 11 for information about how this field is defined for the Add New Card template. Note 2 Provides a user-defined field. See Configuring the System, page 11 for information about how this field is defined for the Add New Card template. 48 www.honeywell.com