Honeywell NX4S1 User Guide - Page 96
The Output Status tab enables you
View all Honeywell NX4S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Monitoring NetAXS™ Status Monitoring Outputs Click Status > Outputs > Groups to display the Groups tab of the Output Status screen: Figure 4-7: Status > Outputs > Groups Tab The Output Status tab enables you to: • View the current status of each output in the Discrete tab (Energized or De-energized). • View the current status of each output group in the Groups tab. • Energize or de-energize any output or group indefinitely. • Pulse any output. This energizes the output or group for a configured period of time (see "Outputs Tab" on page 38). • Restore the output to its configured time zone. A time zone is a specified time period during which the output will be energized. (see "Configuring Time Management" on page 24). Steps: 1. To energize an output or group of outputs for an indefinite period of time, click the De-energized button to display a prompt. Click OK to complete the change to "Energized." To de-energize an output or group of outputs for an indefinite period of time, click the Energized button to display a prompt. Click OK to complete the change to "De-energized." 2. To Pulse an output or group of outputs for the configured period of time, click the Pulse button to display a prompt. Click OK to start the pulse. Note that the Pulse button will be greyed out if no output is attached. 3. To reset the output behavior according to its configured time zone, click the Restore to Time Zone button to display a prompt. Click OK to restore the time zone. Note that the Restore to Time Zone button will be greyed out if no output is attached. Note: The Output Status screen dynamically refreshes when the output status changes. 86 www.honeywell.com