IBM 25R0012 User Guide - Page 27
Operating, Drive
UPC - 000435800176
View all IBM 25R0012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Operating the Drive Operating the drive involves using the following front panel items: v Single-character Display (SCD) v SCD Dot v Status Light v Unload Button Single-character Display (SCD) The SCD (see 3 in Figure 2) presents a single-character code for: v Error conditions and informational messages: "Error Codes and Messages" on page 45 lists the codes for error conditions and informational messages. If multiple errors occur, the code with the highest priority (represented by the lowest number) displays first. When the error is corrected, the code with the next highest priority displays, and so on until no errors remain. v Diagnostic or maintenance functions (while in maintenance mode only): "Diagnostic and Maintenance Functions" on page 15 lists the single-character codes that represent diagnostic or maintenance functions. To initiate a function the unit must be in maintenance mode. The SCD is blank during normal operation. SCD Dot If a drive dump is present while the drive is in maintenance mode, a single red dot illuminates in the lower right corner of the SCD ( 8 ). To copy the dump, see "Function Code 5: Copy Drive Dump" on page 19. The SCD Dot turns off when you obtain the dump (by using an FMR tape, a SCSI command, or a library command). Status Light The Status Light ( 1 in Figure 2) is a light-emitting diode (LED) that provides information about the state of the drive. The light can be green or amber, and (when lit) solid or flashing. The table below lists the conditions of the Status Light and Single-character Display (SCD) and provides an explanation of what each condition means. Table 1. Meaning of Status Light and Single-character Display (SCD) If the Status Light is... Off Green Flashing Green and the SCD is... Off Off Off Meaning The drive has no power or is powered off. The drive is powered on and in an idle state. The drive is reading from the tape, writing to the tape, rewinding the tape, locating data on the tape, loading the tape, or unloading the tape. © Copyright IBM Corp. 2005 11