IBM 25R0012 User Guide - Page 77
Apparent, Failure, Damage
UPC - 000435800176
View all IBM 25R0012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
a82ru010 __ Step 9. Rotate the loader motor worm gear 1 to turn the threader mechanism gear 6 counterclockwise. Continue turning until the rotator stub 3 loses contact with the lever 7 . This releases the LBA leader pin. __ Step 10. Rotate the threader motor worm gear 4 to turn the threader mechanism gear 6 counterclockwise. This moves the LBA out of the cartridge and past the read/write head. Stop this rotation when the LBA is near the tape guide roller nearest the rear of the drive shown as 1 . 1 Figure 26. Leader Block Assembly (LBA) __ Step 11. Continue rotating the loader motor worm gear 1 until the rotator stub 3 is positioned as shown. Notice that the rotator stub 3 is nearly aligned with the cartridge loader tray guide bearing 2 . __ Step 12. Remove the cartridge from the cartridge loader tray. __ Step 13. Reassemble the drive by reversing the procedure in Step 4 in "Beginning Procedure" on page 53. __ Step 14. Refer to the appropriate procedure to install the new drive and return the failed drive. No Apparent Failure or Damage to Tape __ Step 1. Set the drive on its left side with the head and tape path facing up. Using Ultrium Media 61