IBM 25R0012 User Guide - Page 83
Table, Supported, TapeAlert, Flags, continued
UPC - 000435800176
View all IBM 25R0012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Table 10. Supported TapeAlert Flags (continued) Flag Number Flag Parameter (in hex) Flag Description Action Required 37 25h Drive voltage Set when the drive detects that See error code 2 in "Error Codes the externally supplied voltages and Messages" on page 45. are either approaching the specified voltage limits or are outside the voltage limits (see "Physical Specifications" on page 69). 39 27h Diagnostics required Set when the drive detects a See error code 6 in "Error Codes failure that requires diagnostics and Messages" on page 45. to isolate the problem. 51 33h Tape directory invalid Set when the tape directory on Rebuild the tape directory by at unload the tape cartridge that was reading all the data previously unloaded is corrupted. The file-search performance is degraded. 52 34h Tape system area Set when the tape cartridge that Copy the data to another tape write failure was previously unloaded could cartridge, then discard the old not write its system area cartridge. successfully. 53 35h Tape system area read Set when the tape system area Copy the data to another tape failure could not be read successfully at cartridge, then discard the old load time. cartridge. Appendix A. TapeAlert Flags 67