IBM 25R0012 User Guide - Page 85
Appendix, Specifications
UPC - 000435800176
View all IBM 25R0012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Appendix B. Specifications The sections below give the physical, power, and environmental specifications for the drive. Physical Specifications Specification Width Length Height Weight (without a cartridge) Measurement 146.0 mm (5.75 in.) without bezel 148.3 mm (5.84 in.) with bezel 205.5 mm (8.09 in.) without bezel 210.5 mm (8.29 in.) with bezel 82.5 mm (3.25 in.) without bezel 84.8 mm (3.34 in.) with bezel 3 kg (6 lb 10 oz) Power Specifications Power Supply Tolerance Voltage Ripple/Noise (50 Hz - 20 MHz) Minimum Supply Current (steady state) Maximum Supply Current (steady state) Peak Supply Current (instantaneous power by power supply) 5 V dc 10% 60 mV pp 1.3 A 3.0 A 3.3 A for 100 ms (15 W) 12 V dc 10% 125 mV pp 0.2 A 1.1 A 4.50 A for 2 ms (49.20 W) Power Measurements Idle Mode (no cartridge) Idle Mode (Cartridge loaded) Reading and Writing (@5.46 m/s) Ultra-160 SCSI drive 10W 12W 28W Environmental Specifications Environmental Factor Operating (see Note 3) Storage Drive temperature 10 to 40°C (50 to 104°F) -40 to 60°C (-40 to 140°F) Relative humidity (noncondensing) 20 to 80% 10 to 90% Wet bulb temperature 26°C (78.8°F) 26°C (78.8°F) Note: Measured in front of the bezel, near the air intake area (refer to Figure 4 on page 6). Shipping −40 to 60°C (−40 to 140°F) 10 to 90% 26°C (78.8°F) © Copyright IBM Corp. 2005 69