Icom IC-R8600 Instruction Manual Version 1.01 - Page 21
About a public IP address and the Dynamic DNS service - service manual
View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3 CONFIGURING THE SYSTEM THROUGH THE INTERNET About a public IP address and the Dynamic DNS service If you configure the remote control system through the Internet, PCs can connect to the receiver using its public IP address or domain name. DDTo let PCs connect to the receiver using its public IP address A public IP address is an address that is accessible over the global Internet. Check the router's manual about how to configure your router to set the public IP address. NOTE: If you have a dynamic public IP address, we recommend that you use the Dynamic DNS service to enable the PCs to connect to the receiver. (p. 3-3) LLIf the PC connected to the receiver is not using the Dynamic DNS service, you need to change setting of PC's Remote Utility to connect to the receiver each time its public IP address changes. Internet IP address WAN: 888.888.888.888 LAN: 192.168.0.1 Router Router Receiver PC Request "888.888.888.888" (Public IP address) 3-2