Icom IC-R8600 Instruction Manual Version 1.01 - Page 31
ABOUT THE REMOTE UTILITY, Setting your PC’s environment
View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
4 ABOUT THE REMOTE UTILITY Setting your PC's environment Configure your PC's environment in the Remote Utility. The settings will take effect after rebooting the Remote Utility. LLWhen you first open the Remote Utility, the Settings screen is displayed. After configuring the settings, you can display other setting screens. 1. Click "Options." 2. Click "Settings." •• The "Settings" screen is displayed. 3. Configure the settings. 4. Click to save the settings. ••"The changes will be effect after the application restarts." is displayed. 5. Click . The settings will take effect after restarting the Remote Utility. 1Click 3 Set 1 2 3 4 5 2Click 4 Click 1 PC Name Enter a name for your PC of up to 16 characters. DO NOT use the same name for more than one PC on your network. 2 Port numbers Enter the port numbers of the Control, Serial, and Audio ports. You should use the default port numbers for these ports. 3 Network Connection Select the network connection type. 4 Internet Access Line Select your internet access line type. 5 Language Select the software display language. The selected language will be used as the Help file language. 5Click NOTE: If you configure the remote control system through the Internet, and change the port number of the Control, Serial or Audio port, you should reconfigure the port forwarding settings and the IP filter settings on your router. (p. 3-4) 4-1