Icom IC-R8600 Instruction Manual Version 1.01 - Page 27

receiver., Internet, Click, Select

Get Icom IC-R8600 PDF manuals and user guides View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

3 CONFIGURING THE SYSTEM THROUGH THE INTERNET Step 2. Settings on the PC's Remote Utility application (Continued) 8 Configure the settings to connect to the receiver. 1. Select the receiver. 2. Click . 3. Click . •• The Select Network screen appears. 4. Select Internet. 5. Click . •• The recommended values for your network are displayed. 6. Click to automatically set the displayed values in each field of the Network Setting, then close the Select Network screen. 7. Select a virtual COM port number. •• The selected COM port number is used for CI-V operation with the receiver. LLWhen you connect to the receiver with the control software, you have to set the COM port number. 8. Select an audio device that your speaker is connected, to output the received audio from the network. 9. Click . 2Click 1Click 3Click 4Select 5Click 6Click 7Select 8Select 9Click 3-8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
3-8
3
CONFIGURING THE SYSTEM THROUGH THE INTERNET
Step 2. Settings on the PC’s Remote Utility application (Continued)
8
Configure the settings to connect to the
receiver.
1. Select the receiver.
2. Click <Settings>.
3. Click <Recommended>.
•
The Select Network screen appears.
4. Select
Internet
.
5. Click <Next>.
•
The recommended values for your network are
displayed.
6.
Click <Yes> to automatically set the
displayed values in each field of the Network
Setting, then close the Select Network
screen.
7.
Select a virtual COM port number.
•
The selected COM port number is used for CI-V
operation with the receiver.
L
When you connect to the receiver with the
control software, you have to set the COM port
number.
8.
Select an audio device that your speaker is
connected, to output the received audio from
the network.
9. Click <OK>.
1
Click
2
Click
3
Click
4
Select
6
Click
5
Click
7
Select
8
Select
9
Click