Icom M802 Instruction Manual - Page 33

7 CALL PROCEDURE D Urgency call operation q Push [MODE SET] to select the DSC menu. w Rotate [CH] to select either "Individual" or "All ships" then push [ENT]. • When selecting "All ships" e Rotate [CH] to select "Urgency," then push [ENT]. ****** All ships Category ------- Safety ÇUrgency SEL OK r Rotate [CH] to select a traffic frequency from one of the pre-programmed frequencies or "Manual set" then push [ENT]. ✔ When a pre-programmed frequency is selected, go to step y. u After the calling stand-by screen appears, push and hold [CANCEL/CALL] for 1 sec. to transmit the urgency call. • The transceiver is set to the traffic frequency after the call transmission. • Push and hold [ENT] for 1 sec. to store the calling condition into the TX memory described in pages 23 and 43, if desired. ****** All ships ******* --------- Call --------- Category:Urgency Traffic:J3E TX 2134.0kHz RX 2134.0kHz Call Freq:TX 2187.5kHz RX 2187.5kHz Call Write-Menu ****** All ships ******* -- Traffic frequency --ÇManual set i Announce the following message. • "PAN PAN" T: 4567.0kHz IC-M802-1 R: 4567.0kHz T:12345.0kHz IC-M802-2 R:12345.0kHz SEL OK • "All stations" (repeated 3 times). • "This is ..... (your ship name)." t Enter the desired traffic frequencies for both the transmit and receive, then push [ENT]. • The 9-digit identity AND the call sign (or 7 other identification of the ship) ****** All ships ******* -- Traffic frequency --- • The text of the urgency message. TX:_2134.0kHz RX:_2134.0kHz SEL OK y Rotate [CH] to select the desired calling channel, then push [ENT]. ****** All ships ******* ---- Call frequency ---- Ç 2187.5kHz 4207.5kHz 6312.0kHz 8414.5kHz 12577.0kHz 16804.5kHz SEL OK 25