Icom M802 Instruction Manual - Page 47

Distress call, Distress relay call

Page 47 highlights

8 WHEN RECEIVING A CALL I Distress call q When receiving a distress call, an emergency alarm sounds and the display below appears. * Distress * * 123456789 * Exit Traffic w Push [CANCEL/CALL] to stop the alarm, if desired. • One distress call sequence is sent 5 times repeatedly within approx. 30 sec. The emergency alarm sounds at each reception. e Push [ENT] to set the transceiver to the distress phone frequency, then monitor the communication from the coast station to the ship in distress. RX < Traffic > J3E GPS Lat 34 34'N SP Lon135 34'E 12:34 Exit r Select the received distress call memory channel to check the position of the ship in distress. ➥ Push [FREQ/CH] then [RX CLAR] to select "RX memory" screen. ➥Select "Distress" with [CH] then push [ENT]. ➥ Push [ENT] again. •The received distress call memory is displayed at the top line with "*" symbol. • When the ship is close to you, communication should be monitored continuously. • The traffic frequency is monitored even when the mem- ory contents is displayed. ****** RX memory ******* ------- Distress ------- Distress ID:123456789 Undesignated Position:Lat 34 34'N Lon134 34'W UTC 12:34 Traffic:J3E TX 2182.0kHz RX 2182.0kHz RX Freq:TX 2187.5kHz RX 2187.5kHz DEL Cancel OK I Distress relay call q When receiving a distress relay call, an emergency r Select the received distress call memory channel alarm sounds and the display below appears. to check the position of the ship in distress. ➥ Push [FREQ/CH] then [RX CLAR] to select "RX 8 * Distress RLY * * 001234567 * memory" screen. ➥ Select "Others" with [CH] then push [ENT]. ➥ Push [ENT] again. • The received distress relay call memory (DTRS Exit Traffic RLY) is displayed at the top line with "*" symbol. • When the ship is close to you, communication should w Push [CANCEL/CALL] to stop the alarm, if desired. e Push [ENT] to set the transceiver to the distress phone frequency, then monitor the communication from the coast station to the ship in distress. RX < Traffic > J3E GPS Lat 34 34'N SP Lon135 34'E 12:34 Exit be monitored continuously. • The traffic frequency is monitored even when the memory contents is displayed. ****** RX memory ******* ----- Distress RLY ----- From:001234567 Distress ID:123456789 To all ships Undesignated Position:Lat 34 34'N Lon134 34'W UTC 12:34 Traffic:J3E TX 2182.0kHz RX 2182.0kHz RX Freq:TX 2187.5kHz RX 2187.5kHz DEL Cancel OK 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78

39
8
WHEN RECEIVING A CALL
8
Distress call
q
When receiving a distress call, an emergency
alarm sounds and the display below appears.
w
Push [CANCEL/CALL] to stop the alarm, if desired.
One distress call sequence is sent 5 times repeatedly
within approx. 30 sec. The emergency alarm sounds at
each reception.
e
Push [ENT] to set the transceiver to the distress
phone frequency, then monitor the communication
from the coast station to the ship in distress.
r
Select the received distress call memory channel
to check the position of the ship in distress.
Push [FREQ/CH] then [RX
CLAR
] to select
RX
memory
screen.
Select
Distress
with [CH] then push
[ENT].
Push [ENT] again.
The received distress call memory is displayed at
the top line with
*
symbol.
When the ship is close to you, communication should
be monitored continuously.
The traf
c frequency is monitored even when the mem-
ory contents is displayed.
******
RX
memory
*******
-------
Distress
-------
Distress
ID:123456789
Undesignated
Position:Lat
34
34'N
Lon134
34'W
UTC
12:34
Traffic:J3E
TX
2182.0kHz
RX
2182.0kHz
RX
Freq:TX
2187.5kHz
RX
2187.5kHz
DEL
OK
Cancel
RX
J3E
<
Traffic
>
Lat
34
34'N
Lon135
34'E
12:34
SP
Exit
GPS
************************
*
Distress
*
*
123456789
*
************************
Traffic
Exit
q
When receiving a distress relay call, an emergency
alarm sounds and the display below appears.
w
Push [CANCEL/CALL] to stop the alarm, if desired.
e
Push [ENT] to set the transceiver to the distress
phone frequency, then monitor the communication
from the coast station to the ship in distress.
r
Select the received distress call memory channel
to check the position of the ship in distress.
Push [FREQ/CH] then [RX
CLAR
] to select
RX
memory
screen.
Select
Others
with [CH] then push [ENT].
Push [ENT] again.
The received distress relay call memory (
DTRS
RLY
) is displayed at the top line with
*
symbol.
When the ship is close to you, communication should
be monitored continuously.
The traf
c frequency is monitored even when the mem-
ory contents is displayed.
******
RX
memory
*******
-----
Distress
RLY
-----
From:001234567
Distress
ID:123456789
To
all
ships
Undesignated
Position:Lat
34
34'N
Lon134
34'W
UTC
12:34
Traffic:J3E
TX
2182.0kHz
RX
2182.0kHz
RX
Freq:TX
2187.5kHz
RX
2187.5kHz
DEL
OK
Cancel
RX
J3E
<
Traffic
>
Lat
34
34'N
Lon135
34'E
12:34
SP
Exit
GPS
************************
*
Distress
RLY
*
*
001234567
*
************************
Traffic
Exit
Distress relay call