Icom M802 Instruction Manual - Page 52

10 DSC MENU OPERATION I General Up to 100 ID codes with frequency and name can be programmed in MENU mode for easy recall during DSC call setting. In addition, the following settings/operation are available in DSC setup menu. • Manual position/time setting (p. 16) • Self-ID (MMSI code) indication (described in this section) I ID input A total of 100 ID codes can be programmed as "Address ID" (for ships and coast stations) and "Group ID" (for group stations). A pair of frequencies (both transmit and receive) and ID name are also programmed together with the ID code which are used as call frequencies when using the ID code. D SETTING PROCEDURES: q During DSC menu indication, rotate [CH] to select "Set up" then push [ENT] to select setup menu. • The select screen is displayed as below. ******** Set up ******** -------- Select -------- ÇAddress ID Group ID Call frqeuency Traffic frqeuency Scan frqeuency MMSI check SEL OK w Rotate [CH] to select the "Address ID" or "Group ID," then push [ENT]. • The address/group ID list screen is displayed. ******** Set up Address ID Set up Group ID ------Ç SEL C an c e l OK When the memory is full: "Memory full" is displayed beside "" indication when 100 ID codes have been programmed. Delete any unnecessary IDs in such cases (see p. 46 for delete). e Rotate [CH] to select "" then push [ENT]. • The address/group ID setup screen is displayed. ******** Set up Address ID ------ ******** Set up Group ID ------- Name ID:0________ TX:_____._kHz RX:_____._kHz SEL C an c e l OK 44 r Push the numeral keys to input the desired 10-digit ID name, 9-digit code and both transmit and re- ceive frequencies, then push [ENT]. • Rotate [CH] to move the cursor. • When entering group code, enter "0 (zero)" for the first digit. • The frequencies entered should be within the marine frequency ranges as follows. 1.6- 2.9999 MHz 4.0- 4.9999 MHz 6.0- 6.9999 MHz 8.0- 8.9999 MHz 12.0-13.9999 MHz 16.0-17.9999 MHz 18.0-19.9999 MHz 22.0-22.9999 MHz 25.0-27.5000 MHz ******** Set up Address ID ------ ******** Set up Group ID ------- Name:ICOM_M802_ ID:012345678 TX:_2345.0kHz RX:_2345.0kHz SEL C an c e l OK t Push [ENT] to program the contents into the address or group ID. • Returns to the address/group ID list screen automatically. •The ID list is displayed in alphabetical order for ID name, so [CH] rotation may be necessary for the programmed ID confirmation. ******** Set up Address ID Set up Group ID ------Ç ICOM M802 012345678 SEL C an c e l OK y Push [MODE SET] to return to DSC watch mode, or push [FREQ/CH] to return to the select screen.