Icom M802 Instruction Manual - Page 37
Safety call operation
![]() |
View all Icom M802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
7 CALL PROCEDURE D Safety call operation A safety call procedure is almost the same as the urgency call. q Push [MODE SET] to select the DSC menu. w Rotate [CH] to select the desired DSC format from "Individual" and "All ships," then push [ENT]. • When selecting "All ships" e Rotate [CH] to select "Urgency," then push [ENT]. y Rotate [CH] to select the desired calling channel, then push [ENT]. ****** All ships Category ------ÇSafety Urgency SEL OK ****** All ships ******* ---- Call frequency ---- Ç 2187.5kHz 4207.5kHz 6312.0kHz 8414.5kHz 12577.0kHz 16804.5kHz SEL OK r Rotate [CH] to select a traffic frequency from one u After the calling stand-by screen appears, push of the pre-programmed frequencies or "Manual and hold [CANCEL/CALL] for 1 sec. to transmit the set" then push [ENT]. ✔ When a pre-programmed frequency is selected, go to step y. ****** All ships ******* -- Traffic frequency --ÇManual set safety call. • The transceiver is set to the traffic frequency after the call transmission. • Push and hold [ENT] for 1 sec. to store the calling condition into the TX memory described in pages 23 and 43, if desired. T: 4567.0kHz IC-M802-1 R: 4567.0kHz ****** All ships ******* 7 --------- Call --------- T:12345.0kHz IC-M802-2 Category:Safety R:12345.0kHz Traffic:J3E SEL OK TX 2134.0kHz RX 2134.0kHz t Enter the desired traffic frequencies for both the Call Freq:TX 2187.5kHz RX 2187.5kHz transmit and receive, then push [ENT]. Call Write-Menu ****** All ships ******* -- Traffic frequency --- TX:_2134.0kHz RX:_2134.0kHz i Announce the following message. • "SECURITE" (repeat 3 times) • "All stations" (repeated 3 times). SEL OK • "This is ..... (your ship name)." • The 9-digit identity AND the call sign (or other identification of the ship) • The text of the safety message. 29
![](/manual_guide/products/icom-icm802-instruction-manual-5480756/37.png)