Icom M802 Instruction Manual - Page 53

DSC MENU OPERATION 10 I Frequency input A total of 50 frequency pairs can be programmed as "Call frequency," "Traffic frequency" or "Scan frequency." The frequency usage and frequency name are also programmed together with the frequency. D SETTING PROCEDURES: q During DSC menu indication, rotate [CH] to select "Set up" then push [ENT] to select setup menu. • The select screen is displayed. w Rotate [CH] to select the "Call frequency" "Traffic frequency" or "Scan frequency," then push [ENT]. • The call/traffic/scan frequency list screen is displayed. ******** Set up Call frequency ---- ******** Set up Traffic frequency --- ******** Set up Scan frequency ---Ç SEL C an c e l OK When the memory is full: "Memory full" is displayed beside "" indication when a total of 50 pairs of frequencies (6 pairs for scan frequency) have been programmed. Delete any unnecessary frequency in such cases (see p. 46 for delete). e Rotate [CH] to select "" then push [ENT]. • The call/traffic/scan frequency setup screen is displayed. ******** Set up Call frequency ---- ******** Set up Traffic frequency --- ******** Set up Scan frequency ---- Comment TX:_____._kHz RX:_____._kHz SEL C an c e l OK NOTE: Up to 6 pairs of frequencies only can be assigned as a scan frequency. They are scanned during DSC watch mode only. (Different from the distress/safety frequencies.) r Push the numeral keys to input the desired 10- character frequency name, and both transmit and receive frequencies, then push [ENT]. • Rotate [CH] to move the cursor. • The frequencies entered should be within the marine frequency ranges as follows. 1.6- 2.9999 MHz 4.0- 4.9999 MHz 6.0- 6.9999 MHz 8.0- 8.9999 MHz 12.0-13.9999 MHz 16.0-17.9999 MHz 18.0-19.9999 MHz 22.0-22.9999 MHz 25.0-27.5000 MHz ******** Set up Call frequency Set up Traffic frequency --- ******** Set up Scan frequency ---- Comment:ICOM_Group TX:_4567.0kHz RX:_4567.0kHz SEL C an c e l OK t Push [ENT] to program the contents into a all, traffic or scan frequency. • Returns to the call/traffic/scan frequency list screen. • The programmed frequency is displayed at the bottom line, so [CH] rotation is necessary for the programmed frequency confirmation. ******** Set up Call frequency Set up Traffic frequency --- ******** Set up Scan frequency ---Ç T: 4567.0kHz ICOM Group R: 4567.0kHz SEL C an c e l OK y Push [MODE SET] to return to DSC watch mode, or push [FREQ/CH] to return to the select screen. 10 45