Icom M802 Instruction Manual - Page 38
Individual, Safety, No information, Manual set
View all Icom M802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
7 CALL PROCEDURE • When selecting 'Individual' e Select "Safety" as the category using [CH], then push [ENT]. ****** Individual Category ------- Routine ÇSafety Urgency Distress SEL OK r Select the desired 9-digit ID code, then push [ENT]. • Use [CH] to select the ID code when the desired ship's ID is pre-programmed. ****** Individual ****** ------ Address ID ------ ÇManual set IC-M802-1 123456789 IC-M802-2 123456788 IC-M802-3 123456787 IC-M802-4 123456786 IC-M802-5 123456785 SEL OK • Select "Manual set" with [CH] then push [ENT], after that, enter the desired 9-digit ID via the keypad. ****** Individual Address ID ------ 987654321 OK t Rotate [CH] to select 1st telecommand, then push [ENT]. ✔ When "No information" is selected, go to step i. ****** Individual ****** --- 1st telecommand ---ÇJ3E No information SEL OK y Rotate [CH] to select the desired pre-programmed traffic frequency, or "Manual set" then push [ENT]. ✔ When the pre-programmed traffic frequency is selected, go to step i. ****** Individual ****** -- Traffic frequency --ÇManual set T: 4567.0kHz R: 4567.0kHz T:12345.0kHz R:12345.0kHz SEL OK IC-M802-1 IC-M802-2 u Enter the desired transmit and receive traffic frequency via the keypad, then push [ENT]. ****** Individual ****** -- Traffic frequency --- TX:_2134.0kHz RX:_2134.0kHz SEL OK i Rotate [CH] to select the desired calling frequency, then push [ENT]. ****** Individual ****** ---- Call frequency ---- Ç 2187.5kHz 4207.5kHz 6312.0kHz 8414.5kHz 12577.0kHz 16804.5kHz SEL OK o The calling stand-by screen is displayed as follows, verify the calling condition then push and hold [CANCEL/CALL] for 1 sec. to transmit the call. • Push and hold [ENT] for 1 sec. to store the calling condition into the TX memory described in pages 23 and 43, if desired. ****** Individual ****** --------- Call --------- Category:Safety To:987654321 Traffic:J3E TX 2134.0kHz RX 2134.0kHz Call Freq:TX 2187.5kHz RX 2187.5kHz Call Write-Menu !0 After sending the call, the transceiver waits for an acknowledgement. Individual < Wait for ACK > RX J2B GPS Lat 34 34'N SP Lon135 34'E 12:34 Exit 30