Icom M802 Instruction Manual - Page 57
Initial set mode
View all Icom M802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
SET MODE 12 I Initial set mode Initial set mode operation is used for programming infrequently changed values, conditions or functions. D Entering set mode q Turn the power OFF, if the transceiver is powered ON. w While pushing [MODE SET], push [POWER] to turn the power ON to enter initial set mode. e Rotate [GRP] to select the desired item. e Rotate [CH] to set the values or conditions for the selected item. r Turn the power OFF and ON again to exit set mode. D Initial set mode items Number of user channels This item sets the number of user channels. Up to 160 channels can be set. (default: 160) NOTE: Selection of some of the set mode items described here are not available on some transceiver versions. [MODE SET] [POWER] *** SET MODE *** ITEM SEL FSK ITU channel selection This item sets the capability of the ITU channels for FSK from ON and OFF. This item will not appear when ITU channels are in- hibited. (default: OFF) *** SET MODE *** ÇÇ O F F ON ITEM SEL External antenna tuner type This item selects the connected Icom antenna tuner type from AT-140, AT-130/E, AT-120/E and AH-3 *** SET MODE *** • AT-140 • AT-130/E • AT-120/E • AH-3 : AT-140 is connected. (default) : AT-130/E is connected. : AT-120/E is connected. : AH-3 is connected. ÇÇ A T - 1 4 0 AT-130/E AT-120/E AH-3 ITEM SEL 12 Automatic tune When an optional automatic antenna tuner is connected, tuning can be started automatically without pushing [TUNE THRU], for instant operation. If manual tuning is required, this automatic operation can be deactivated. (default: OFF) *** SET MODE *** ÇÇ O F F ON ITEM SEL 49