Icom M802 Instruction Manual - Page 49

8 WHEN RECEIVING A CALL I Individual call When receiving an Individual call, beeps may sound (or the emergency alarm depending on the category) and the display below appears. * Individual * * ICOM M802 * Exit ACK Calling station's name appears when the same ID is preprogrammed. You must send back an acknowledgement to the calling station in such cases. q When "Individual" is displayed as above, push [ENT] to display the calling contents. • The received call is selected in RX memory. • Rotate [CH] to scroll text to see hidden lines information. ****** RX memory ******* ------ Individual ------ Category:Routine From:ICOM M802 Traffic:J3E TX 2345.0kHz RX 2345.0kHz RX Freq:TX 12345.0kHz RX 12345.0kHz DEL Cancel ACK t Push [CANCEL/CALL] for 1 sec. to transmit the Individual acknowledgement. • When "Able" is selected in step e. **** Individual ACK Call --------Category:Routine To:ICOM M802 Traffic:J3E TX 2345.0kHz RX 2345.0kHz Call Freq:TX 12345.0kHz RX 12345.0kHz Call • When "Unable" is selected in step e. w Push [ENT] for acknowledgement call preparation. **** Individual ACK **** e Rotate [CH] to select that you can comply to the --------- Call --------Category:Routine call or not from "Able" and "Unable," then To:ICOM M802 Unable to comply 8 push [ENT]. Reason: ✔ When "Able" is selected, go to step t. Operator unavailable Call Freq:TX 12345.0kHz **** Individual ACK **** RX 12345.0kHz Call -------- Comply -------- ÇAble Unable y After the transmission, the transceiver selects - • The specified traffic frequency when "Able" is selected in step e: DEL Cancel ACK r When "Unable" is selected in step e, rotate [CH] to select the desired reason, then push [ENT]. **** Individual ACK **** -------- Comply -------- ÇNo reason given Busy Channel unable Mode unable Operator unavailable No operator Station barred Equipment disable Congestion Queue indication SEL OK < Traffic > RX J3E GPS Lat 34 34'N SP Lon135 34'E 12:34 Exit • The DSC watch mode when "Unable" is selected in step e: 41