Icom M802 Instruction Manual - Page 5
Audio output/squelch adjustment
![]() |
View all Icom M802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
QUICK REFERENCE Quick Reference I Audio output/squelch adjustment D Audio output level ➥ Rotate [VOL] to adjust audio output level. NOTE: Make sure that no " SP " and "SQL" indicators are displayed during audio level adjustment, otherwise, audio may not be output. When either or both indicators are displayed, perform the following operations; - When " S P " is displayed, push [F] then [4 SP×]. - When "SQL" is displayed, push [F] then [2 SQL]. D Squelch function ➥ Push [F] then [2 SQL] to turn the squelch function ON and OFF. [4 ] SP× [2 SQL] [F] [VOL] J3E SIMP [F] [2 SQL] • Squelch level adjustment q Push [F] then [2 SQL] to turn the squelch function ON. • Select the desired frequency/channel in advance, if desired. w Push [F] then [MODE SET] to enter quick set mode. [F] [MODE SET] [2 SQL] [GRP] [CH] SQL L CH ---GPS--- Lat 45 59'N Lon134 44'E H 16:23 "SQL" appears when the squelch function is ON. e Rotate [GRP] to select the "S-SQL LEVEL" item. r Rotate [CH] to adjust the squelch level. • Adjust the level within 1-100 range. ITEM SEL t Push [MODE SET] to exit quick set mode. • Voice squelch function The voice squelch function detects voice components in the received signal and opens the squelch only when voice components are included in the signal. q While pushing [MODE SET] turn the power ON to enter initial set mode. [MODE SET] [2 SQL] [CH] [GRP] [POWER] w Rotate [GRP] to select the "VOICE SQL" item. e Rotate [CH] to select the voice squelch function ON and OFF *** SET MODE *** OFF ÇÇ O N ITEM SEL r Turn the power OFF then ON again to exit initial set mode. II
![](/manual_guide/products/icom-icm802-instruction-manual-5480756/5.png)