Icom M802 Instruction Manual - Page 8
Regular distress call
View all Icom M802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
QUICK REFERENCE D Regular distress call q Push [DSC] to enter DSC watch mode. [DSC] w Push [MODE SET] to enter DSC menu. [MODE SET] [CH] [ENT] e Rotate [CH] to select "Distress" then push [ENT] ******* DSC MENU ******* -------- Select -------- Position Individual Group All ships Position REQ ÇDistress Test RX memory TX memory Set up Exit SEL OK r Rotate [CH] to select the desired nature then push [ENT]. Distress Nature ÇUndesignated Fire,Explosion Flooding Collision Grounding Capsizing Sinking Disable adrift Abandoning ship Piracy attack Man overboard EPIRB emission SEL OK t Verify your position and the UTC time, then push [ENT]. • When no NMEA0183 ver. 3.01 data is applied to [GPS], your position and UTC time should be input in this step. - Use the keypad and [CH] when changing your position or the time. - Move the cursor with [CH] rotation. - [3 SCAN], [6 RF-G], [7 Lo] and [9 Hi] is used for the 'East,' 'North,' 'South' and 'West' selection. ******* Distress Position & time ---- Latitude 34 34'N Longitude 135 34'E UTC 12:34 Null OK y Rotate [CH] to select the DSC calling frequencies, then push [ENT]. • After pushing [ENT], return to DSC menu as shown in step e. ******* Distress ******* -------- Attempt ------- ÇSingle;six frequency Single; 2187.5kHz Single; 4207.5kHz Single; 6312.0kHz Single; 8414.5kHz Single;12577.0kHz Single;16804.5kHz SEL OK u Lift up the distress switch cover, then push and hold [DISTRESS] for 5 sec. [DISTRESS] V