Icom M802 Instruction Manual - Page 68
Fuse replacement
View all Icom M802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
13 CONFECTION AND INSTALLATION I Fuse replacement The transceiver has 2 fuses (2 types) to protect internal circuitry, 1 fuse for the fuse holder on the DC power cable and 1 for inside. If the transceiver stops functioning, check the fuses below. • DC power cable FGB 30 A • Circuitry fuse FGB 5 A D Internal fuse replacement q Unscrew 8 screws from the top cover, then remove the cover. CAUTION: DISCONNECT the DC power cable from the transceiver when changing a fuse. e Replace the circuitry fuse as shown in the diagram below. • Use the supplied FGB 5 A fuse (glass tube type). w Unscrew 8 screws from the PA shield cover, then open the cover. • The cooling fan is fixed with the PA shield cover. • Move the coaxial cable as shown in the diagram. • Be careful the cooling fan power cables are still connected. r Attach the PA shield cover, coaxial cable and top cover to their original position. Coaxial cable D Line fuse replacement 60 FGB 30 A