JVC GY-HM600U GY-HM600U Instruction Manual (135 pages)

JVC GY-HM600U Manual

Get JVC GY-HM600U PDF manuals and user guides View all JVC GY-HM600U manuals
Add to My Manuals
Save this manual to your list of manuals

JVC GY-HM600U manual content summary:

  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 1
    . HD MEMORY CARD CAMERA RECORDER GY-HM600U/GY-HM600E INSTRUCTIONS TIME CODE . The specifications and appearance of this product are subject to changes for further improvement without prior notice. Please check the latest version of the INSTRUCTIONS from the following Mobile User Guide, or download
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 2
    . IMPORTANT SAFEGUARDS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 3
    the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. . This device complies modifications not approved by JVC could void the user's authority to operate the equipment. This equipment has been tested and found to comply
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 4
    A UN AGENT QUALIFIE EN CAS DE PROBLEME. Le symbole de l'éclair à l'int trouvent dans le manuel d'instructions. Ces symboles ne sont camera functions abnormally. WARNING: The battery pack, the camera The rating information and safety caution of the AC adapter are on its upper and lower sides.
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 5
    environmental problems must AC plug adapter called a "Siemens Plug" as shown. For this AC plug adapter, consult your nearest JVC dealer. Plug Adapter Remove the AC adapter from the AC wall outlet when not in use. Do not leave dust or metal objects adhered to the AC wall outlet or AC adapter (power
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 6
    . Die europäische Vertretung für die JVC KENWOOD Corporation ist: JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Deutschland CAUTION: To avoid electric shock or damage to the unit, first firmly insert the small end of the power cord into the AC Adapter until it is no longer
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 7
    our web page http://www.jvc.eu to obtain information about supplied battery pack is a lithium-ion battery. Before using the supplied temperatures will increase natural discharge and shorten service life. ... keep a 30% battery level . ... remove from charger or powered unit when not in use, as some
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 8
    Hood 26 Power Supply 26 Using a Battery Pack 26 Using AC Power (DC IN Power 28 Power Status Display 28 Turning On/Off the Power 29 Initial Time Code on Another Camera 64 Setting Zebra Pattern 65 Setting Spot Meter 66 Viewing Recorded Videos Immediately (Clip Review 68 Splitting the Clips
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 9
    A/V Set Menu 101 Video Set Item 101 Audio Set Item 102 System Menu 104 Record Set Item 105 Adding/Editing Frequently Used Menu Items (Favorites Menu 108 Adding Menu Items to Favorites Menu ...... 108 Editing Favorites Menu 109 Display/Status Screen Display Screen in Camera Mode 112 Display
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 10
    HD)/AVCHD File Format By inheriting the concept in ProHD memory camera recorder, this camera recorder can support various file formats, such as AVCHD and QuickTime manual focus as well. A built-in optical image stabilizer feature is also available. Professional Switch Layout and Various Video
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 11
    checking the video images. (For MP4 file format) The CD-ROM provided with this camera recorder comes with [JVC ProHD Clip Manager] and other application software as well as their user guides. * For details, refer to the user guides for each application software. How to use this manual Symbols used
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 12
    long time 0 Use up the charge completely and detach it from the camera to prevent deterioration. (Wait for the battery to run out by itself such °F and 77 °F). o ATTENTION: The product you have purchased is powered by a rechargeable battery that is recyclable. Please call 1-800-8-BATTERY for information
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 13
    you turn on the power. SDHC/SDXC Cards o SDHC/SDXC card is referred to as "SD card" in this manual. o This camera recorder saves the recorded as recording, playback, or formatting). Do not turn off the power or remove the battery and AC adapter during access either. o Do not use or store the SD
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 14
    camera malfunction. o Noise may appear in the image when switching modes. o If placed on its side, heat release efficiency will deteriorate. o Use the supplied AC adapter as the power supply. Do not use the supplied AC adapter when switching between the live video and playback images. o Due
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 15
    MPEG-2 Patent ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 16
    Introduction Operation Modes This camera recorder has three operation modes - Camera mode, Media mode, and USB mode. . Camera Mode [MODE] Button Press and hold [MODE] button Thumbnail Display Media Mode Playback Button Stop Button Playback (Playback/Pause/ Frame-by-Frame/ Fast Forward/Rewind
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 17
    [REC] trigger button to start recording. Memo : 0 Playback of SD card is not possible in Camera mode. However, you can check the most recently recorded video clip. (A P68 [Viewing Recorded Videos Immediately (Clip Review)] ) 0 This mode allows you to play back or delete clips recorded on the SD card
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 18
    ASSIST/1 OIS/2 LOLUX/3 TIME CODE FOCUS AUTO MENU/THUMB AE LEVEL POWER ON (OCFHFG) MANU MODE SLOT A/B ʿ PUSH AUTO GAICNANWCHETL BAL at the top of the handle. ZOOM REC SERVO MANUAL JI J [ZOOM SERVO/MANUAL] Zoom Operation Servo/Manual Switch Set to "SERVO" when using the zoom lever
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 19
    . S [C.REVIEW/7] Clip Review/User 7 Button For checking the most recently captured images. (A P68 [Viewing Recorded Videos Immediately (Clip Review)] ) You camera recorder may fall and cause injuries. 0 Check the instruction manual provided with the shoulder belt before using. c [POWER/CHG] Power
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 20
    Push Auto Button (A P46 [One Push Auto Focus] ) D [IRIS] Iris Auto/Manual Selection Button (A P49 [Adjusting the Iris] ) E [PUSH AUTO] Iris Push Auto Button [MODE] Camera/Media Mode Selection Button (A P16 [Operation Modes] ) O [POWER ON/OFF(CHG)] Lock Power ON/OFF Switch Turns ON/OFF the power. 0
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 21
    ) T [MENU/THUMB] Menu/Thumbnail Button 0 Displays the menu screen during Camera mode. (A P86 [Basic Operations in Menu Screen] ) 0 Displays the DC Input Terminal Input terminal for DC 12 V power supply. Connects with the bundled AC adapter. (A P28 [Using AC Power (DC IN Power)] ) A D C B . A SD
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 22
    INT INPUT1 INPUT2 INPUT1 INPUT2 LINE MIC MIC +48V MONITOR CH1 BOTH CH2 AUTO MANUAL LCD BRIGHT PEAKING DISPLAY STATUS CH1 CH2 E FG HI . A LCD Monitor (A shaped button : Selects menu (JK) items and setting values 0 During Camera mode You can also use it as a user button by assigning a
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 23
    Cover] ) C Focus Ring (A P45 [Focus Operation] ) D Zoom Ring (A P44 [Zoom Operation] ) To operate zoom with this ring, set the [ZOOM SERVO/MANUAL] switch to "MANUAL". E Iris Ring (A P49 [Adjusting the Iris] ) To operate auto iris, press the [IRIS] button on the side control panel. (a mark appears on
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 24
    Introduction Basic System Diagram Shoulder Belt GY-HM600 Microphone Earphone Wireless Microphone Receiver [TC] [AUX] GY-HM600 Battery Monitor Monitor SDI Cable BNC HDMI Cable AV Cable RCA pin Carrying Case Tripod . AC Adapter Remote Control Unit USB Cable SDHC/SDXC SDHC/SDXC Memory Card
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 25
    the tripod. To prevent the camera recorder from falling off, which may result in injuries or damages, read the instruction manual of the tripod to be groove of the eyecup mounted on the camera recorder. 0 The large eyecup can be attached in any direction. Large Eyecup (supplied) Eyecup . Memo : 0 Do
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 26
    direction of the arrow until it is locked. . Power Supply To use this camera recorder, you can attach a battery pack or connect an AC adapter to it. (A P26 [Using a Battery Pack] ) (A P28 [Using AC Power (DC IN Power)] ) Caution : 0 Set the [POWER ON/OFF(CHG)] switch to "OFF(CHG)" before changing
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 27
    supplied battery. Slide it in until you hear a click. 3 Connect the supplied AC adapter to the [DC] terminal. 4 Connect the AC adapter to a power outlet. 0 The [POWER camera recorder unused with the battery inside will deplete the battery power even if you set the [POWER your nearest JVC dealer.
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 28
    Preparations Using AC Power (DC IN Power) Use the supplied AC adapter to operate the camera recorder with AC power. 2 POWER ON 1 OFF (CHG) MODE . 1 Connect the DC cable of the AC adapter to the [DC] terminal of the camera recorder. 0 Check that the power switch of the camera recorder is set
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 29
    terminal. Memo : 0 If you continue to use the camera recorder while the power warning is displayed, the camera recorder will stop automatically when the battery or supplied voltage from the AC adapter becomes lower. Caution : 0 The remaining battery power and time are displayed as they are from the
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 30
    MENU/THUMB AE LEVEL CANCEL POWER ON OFF (CHG) MODE . Memo : 0 It is recommended to use the AC adapter as the power supply. 0 Be sure to close camera recorder. 3 Press the Set button (R) after confirming the exit screen. The [Initial Setting] screen appears. 0 For GY-HM600U . . 0 For GY-HM600E
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 31
    date/time data is saved in the built-in rechargeable battery even if the power is turned off. 4 Set the time zone and date/time. A Move menu B [Time Style] item. Date/Time Display in Each Operation Mode During Camera mode: Date/time of the built-in clock is displayed. During Media mode: Shooting
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 32
    On TV] is set to "On", the display screen and menu screen are also displayed in the video image of the video signal output terminal. (A P101 [ Display On TV ] ) Display Screen Display Screen in Camera Mode 0 The display switches between three screen types with every press of the [DISPLAY] button
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 33
    P16 [Operation Modes] ) 0 Press the [STATUS] button to switch to the display screen. 0 Press the [MENU] button at each status screen (other than the [Camera Information] screen) to enter the setting screen. 0 Use the cross-shaped button (HI) to switch screens as follows: USB Mode Screen This screen
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 34
    Adjusting the LCD Monitor and Viewfinder You can monitor video images on this camera recorder using the viewfinder, LCD monitor, or both. Adjusting the LCD Monitor 3 LCD BRIGHT PEAKING Tilt 90 degrees 2 downward Inverted LCD Normal LCD DISPLAY Tilt
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 35
    Changing the brightness of the screen will not affect the recorded images. 1 PEAKING 2 . Caution : 0 A high-definition viewfinder is used on this camera recorder in order to provide an accurate focusing environment. Due to the characteristic of the display device, colors may appear on the images
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 36
    . The lamp blinks when the battery or remaining space on the SD card is low. (Camera mode only) * Set using [Tally Lamp] in the [Main Menu] B [System] menu. (A P104 [ Tally Lamp ] ) TIME CODE C.REVIEW/7 MENU/THUMB CANCEL FOCUS ASSIST/1 OIS / 2 LOLUX / 3 AE LOCK/4 ZEBRA/5 MARKER/6 TIME CODE
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 37
    P43 [Selecting System Definition, File Format and Video Format] ) Caution : 0 Using cards other of SD Cards The estimated recordable time is only a guide. Differences may occur depending on the SD card in can be recorded to one SD card on this camera recorder. When 600 clips are recorded to one card
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 38
    Preparations Inserting an SD Card This camera recorder comes with two card slots (Slot A and B) for video/audio recording and playback. 2 1 A 2 card is being accessed. (writing/reading data) Do not turn off the power of the camera recorder or remove the SD card. Lights up in green On standby.
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 39
    ) SD Cards When the following cards are inserted, [!FORMAT] appears at the remaining media display area. Format the card using the camera recorder menu. 0 Unformatted SD cards 0 SD cards formatted under different specifications * For details of the menu operation, refer to "[Basic Operations
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 40
    If you format the SD card, all data recorded on the card, including video data and setup files, will be deleted. Restoring the SD Card It is necessary the SD card. 0 Restoring cannot be performed in the following cases. 0 Camera recorder is recording in progress. 0 SD card is not inserted. 0 Write-
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 41
    be played back continuously on the camera recorder. 0 Clips may be recorded across the two SD cards in card slots A and B depending on the recording time of the clip. 0 When copying videos in MP4 file format to a HDD using a PC, it is recommended to use [JVC ProHD Clip Manager Software], which is
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 42
    Shooting Basic Shooting Procedures Preparations 2 4 4 3 POWER ON OFF (CHG) MODE 1 . 1 Supply battery or AC adapter power to the camera recorder. (A P26 [Power Supply] ) 2 Insert an SD card. (A P37 [SD Card] ) 3 Turn on the power of the camera recorder. Hold down the lock button (blue) at
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 43
    VBR in "HQ" mode, and 17 Mbps VBR in "SP" mode. List of Formats The following is a list of file formats and video formats that can be selected on this camera recorder. 0 When [System] is set to "HD" Record Format Format Resolution Frame & Bit Rate QuickTime 1920x1080 60i(HQ) /MP4 30p(HQ
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 44
    of SD Videos Select an F1.6 1/100 . Using the Zoom Lever at the Handle 1 Set the [ZOOM SERVO/MANUAL] switch to "SERVO". 2 Set the [FIX/VAR/OFF] zoom speed switch to " Handle Zoom Speed]. 0 Set the zoom speed using [Main Menu] B [Camera Function] B [Handle Zoom Speed]. (A P91 [ Handle Zoom Speed ]
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 45
    the "Preset Zoom1", "Preset Zoom2", or "Preset Zoom3" function and release within 1 second. 0 The camera recorder zooms to the stored zoom position. Memo : 0 To recall the stored zoom position, set the [ZOOM SERVO/MANUAL] switch to "SERVO". 0 The zoom speed to the zoom position can be set with [Main
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 46
    the frame automatically. Memo : 0 Face detection does not work during One Push Auto Focus. 0 When the operation is complete, the camera recorder returns to the Manual Focus mode automatically. 0 One Push Auto Focus functions with emphasis on the focusing speed. This function is not suitable during
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 47
    selected person. Detection Frame (Orange) Selecting Specific Person from Several Persons 1 Hold down the user button that is assigned with "Face Detect". 0 The camera recorder will enter face selection mode and the face detection icon (q) will blink. 0 An orange frame will appear on the face of the
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 48
    Electronic Shutter] ) Memo : 0 If Iris, Gain and Shutter Speed are manually adjusted, the [AE Level] setting is temporarily disabled. AE LOCK/4 MENU/ can use the cross-shaped button (HI) on the side of the camera recorder to set the target level (brighter/darker) to maintain optimum brightness
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 49
    Iris mode, press the [PUSH AUTO] button to adjust the iris according to the brightness of the object. Push Auto Iris When the camera recorder is in Manual Iris mode, hold down the [PUSH AUTO] button to change to Auto Iris mode temporarily. The iris will be automatically adjusted according to the
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 50
    M H OFF . Fixed Gain Mode (Manual Gain Switching) 1 Press the [GAIN] button to set to the Manual Gain mode. 0 The a icon on [FULL AUTO] switch on the camera recorder to "ON" to enter Automatic Gain Level Control ([ALC] fixed). The gain of the video amplifier is automatically set according to
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 51
    manually or automatically. Fixed Shutter Mode (Manual Shutter Switching) 1 Press the [SHUTTER] button to set to the Manual may be selected using [Shutter] in the [Camera Function] menu. "Step" is the factory . Shutter speed differs according to the video format and variable frame rate settings. Memo
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 52
    Shooting During Variable Frame Rec Shutter Resolution/ Frame & Bit Rate Frame Rate 60, 30, 15 54, 27 720/30p, 720/24p, 1080/30p, 1080/24p 50, 25 48, 24, 12, 6 45, 22.5 40, 20, 10 36, 18 J ON (Step) ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ 1/10000 ^ ^ ^ ^ ^ 1/10000 1/4000 ^ ^ ^ ^ 1/
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 53
    Shutter mode. 0 The a icon appears on the screen. 0 The camera recorder enters the automatic shutter adjustment mode. The shutter speed is automatically adjusted FULL AUTO ON OFF . Manual White Balance Mode (Manual Switching) 1 Press the [WHT BAL] button to set to Manual White Balance mode. 0 You
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 54
    execute white balance. The white balance will be automatically adjusted and the adjusted value will be saved in Memory A or Memory B. 1 Prepare the camera recorder. A Set the [POWER ON/OFF(CHG)] switch to "ON". B Press the [IRIS] button to set to the Auto mode. C Set the [FULL AUTO] switch to "OFF
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 55
    White Paint Adjustment You can fine-tune the white balance saved in Memory A or Memory B. 1 Select [AWB Paint] in the [Main Menu] B [Camera Process] B [White Balance] menu, and press the Set button (R). The White Paint Adjustment screen appears. 1 AUTO WHITE A OK Result Display . Caution : 0 Do
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 56
    10 0 FAW 5.6f t ND 1 /64 AE+6 0dB F1. 6 1/ 100 FAW . Caution : 0 The accuracy of [FAW] is inferior to that of Auto White Balance. 0 When the power of the camera recorder is turned on with the [FAW] mode selected, it takes about 15 seconds for the colors to stabilize. Memo : 0 When [Main Menu
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 57
    CH2) in synchronization with video images on this camera recorder. Select from the four LINE MIC MIC +48V LCD BRIGHT PEAKING AUTO MANUAL CH1 CH2 FULL AUTO ON OFF . Selecting to a microphone (phantom microphone) that requires a +48 V power supply. Memo : 0 Set the reference input level of "MIC
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 58
    or automatically. CH1 CH2 INT INPUT1 INPUT2 LC AUTO MANUAL CH1 CH2 FULL AUTO ON OFF . Manual Adjustment Mode (Manual Adjustment) 0 Set the [CH1/CH2 AUTO/MANUAL] switch on the camera recorder to "MANUAL" to enter the manual adjustment mode, and use the [CH1]/ [CH2] recording level adjustment
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 59
    the monitor volume. Memo : 0 Audio during recording is not output from the monitor speaker. 0 Warning tone is output when there is an abnormality in the camera recorder or when the battery is low. (A P130 [Warning Tone] ) 59
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 60
    Time code and user's bit data are recorded with the video in this camera recorder. The time code and user's bit are displayed on times regardless of the recording status. It continues to run even when the power of the camera recorder is turned off. Free Run The time code operates in the run mode
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 61
    Shooting Setting Time Code Generator Presetting the Time Code Time code and user's bit data generated from the internal time code generator are recorded. This section describes how to set [TC Preset] in the [TC/UB] menu. (A P97 [ TC Preset ] ) Memo : 0 When [Main Menu] B [System] B [Record Set] B [
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 62
    Shooting 2 Set the time code (hour, minute, second, frame). Use the cross-shaped button (HI) to place the cursor at the item to set, then use the crossshaped button (JK) to change the values. 1 Select [Main Menu] B [TC/UB] B [UB Preset] and press the Set button (R). (A P97 [ UB Preset ] ) The [UB
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 63
    The time code is set and the screen returns to the normal screen. 0 To cancel the setting, press the [CANCEL] button. Caution : 0 When the camera recorder is switched to Media mode during editing, editing will be canceled and the screen will close. 0 When editing time code, operations of the [FOCUS
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 64
    SD B SDI HDMI REMOTE DC [OUT] IN OUT TC Slave Device (This Camera Recorder) INPUT2 INPUT1 BATT.RELEASE A AUX P/OCWHGER REC DEVICE AV HD/SD the time code may be out of synchronization when the [A/V Set] B [Video Set] B [HDMI/SDI Out] setting of the Master device and Slave device is being changed
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 65
    Shooting Setting Zebra Pattern When the luminance level range for displaying zebra patterns is specified, diagonal lines (zebra pattern) are displayed at areas with the specified luminance levels during shooting. AE LEVEL PUSH AUTO ZEBRA/5 . 1 Set the zebra display pattern. Select the display
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 66
    is displayed. This function is useful when setting video or stage lighting or when specifying camera exposure. A cursor indicating the location and the the screen. Frame may also be stopped at the current positions. Manual Displays the Green brightness (%) of (Blinks in green the specified
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 67
    disappear. 282min 100min 50min 00:00:00.00 Jan 24,2012 12:34:56 4030 20 10 0 P 13000K 5.6 f t ND 1/64 AE+6 0dB F1.6 1/100 . When [Manual] is selected A The brightness of the cursor position is displayed when the button is pressed. 282min 100min 50min 4030 20 10 0 00:00:00.00
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 68
    during standby ("STBY" is displayed). Playback of the configured section starts. Memo : 0 The video clip is played back according to the setting in [Main Menu] B [Camera Function] B [User Switch Set] B [Clip Review]. By default setting (Last 5sec), the last 5 seconds of the clip is played back
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 69
    Mode ] ) 0 The split clips are recorded seamlessly without interruptions in the video. Dual Rec 0 If both the slots are loaded with recordable cards in the identical, and two clips of the same content can be created only on this camera recorder. (A P107 [ Slot Mode ] ) REC HOLD A INPUT2 INPUT1
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 70
    cards is accidentally removed while recording is in progress in the Dual Rec mode, recording to the card in the other slot will continue. However, repair of the accidentally removed card by the recovery function may fail. 0 If an error occurs on one of the cards while recording is in progress
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 71
    Mode] is set to "Backup"), you can control recording to the 2 slots at different timings, and backup recording can only be performed on this camera recorder. (A P107 [ Slot Mode ] ) 0 You can record without worrying about missing the important scenes by setting slot B to be always recording (backup
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 72
    Shooting 3 Start normal recording (normal recording into slot A) 0 Press any of the [REC] buttons. 0 Recording into the media in slot A starts. (The characters "RREC" appear in red.) 0 The card icon of slot A turns red (unselected state), and the status indicator of slot A blinks in red. Red (not
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 73
    . 0 Immediately after power on 0 Immediately after recording stops 0 Immediately after switching from Media mode to Camera mode 0 Immediately after setting [Rec Mode] 0 Immediately after the end of Clip Review 0 Immediately after changing file format 0 Immediately after changing video format Clip
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 74
    Memo : 0 When the [CANCEL] button is pressed while the camera recorder is paused (STBYC), the display changes ("STBYC" (yellow text text). 0 Clip Review operation (A P68 [Viewing Recorded Videos Immediately (Clip Review)] ) 0 Switching [POWER ON/OFF(CHG)] switch is turned off during recording
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 75
    is cut off due to low battery power, a proper clip may not be generated. 0 When [Format] in the [Main Menu] B [System] B [Record Set] B [Record Format] menu is set to "AVCHD", Clip Continuous Rec
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 76
    Shooting Interval Rec In normal recording, when the recording stops, the image and accompanying data from the start till the end of the recording are recorded as one "clip" on the SD card. In this mode, recording and pause are performed repeatedly at the specified time interval. Only the specified
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 77
    slow motion or quick motion videos. Using different frame rate settings for recording and playback, videos captured at normal speed can be in the table below. Memo : 0 When [AE LEVEL SW] in the [Main Menu] B [Camera Function] menu is set to "AE LEVEL/VFR", you can use the cross-shaped button (HI)
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 78
    to the Media mode. Press and hold the [MODE] selection button in Camera mode to enter Media mode. A thumbnail screen of the clips recorded Operation Buttons Use the operation buttons, on the side control panel of the camera recorder or the LCD monitor, to operate the thumbnail screen. A MENU/THUMB
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 79
    back nor displayed in thumbnail with the current video format settings. It cannot be played back even to "AVCHD", files recorded on camera recorder other than the GY-HM600 and GY-HM650 series may not be played the last page. I Remaining Battery Power (A P28 [Power Status Display] ) J Number of
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 80
    Playback Detailed screen * Items that are common with the Standard screen will not be described. Refer to "[Standard screen] P 78". A B C . A Thumbnail Thumbnail of the clip selected by the cursor. Use the cross-shaped button (HI) to move the cursor. B Scroll Mark (DE) 0 If there are previous
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 81
    the operation buttons on the side control panel of the camera recorder to play back. MENU/THUMB AE LEVEL CANCEL A on the LCD monitor and viewfinder. Memo : 0 The time code is also superimposed on the video signal output from the [HD/SD SDI] output terminal. 0 User's bit output from the [
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 82
    deletion appears. MENU/THUMB CANCEL 3 MENU/THUMB AE LEVEL OIS / 2 LOLUX / 3 CANCEL . Memo : 0 Clips appended with OK marks cannot be deleted on the camera recorder. 0 Read-only clips can be deleted on a PC. . 4 Select [Delete] using the cross-shaped button (JK), and press the Set button
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 83
    append OK marks to the clips for important scenes. 0 Clips appended with OK marks cannot be deleted, thus protecting the important clips. 0 When the camera recorder is in Media mode, you can delete the OK marks appended during recording, or append/delete OK marks after shooting. During Playback or
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 84
    Playback Selecting and Performing Operations on Multiple Clips 0 Multiple clips can be selected during thumbnail screen or playback screen display. 0 After selecting multiple clips, perform appending/deleting of OK mark, deleting of clips using the action selection screen. 0 After selecting
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 85
    Playback 5 Press the Set button (R) to confirm the range. 0 The check marks change from magenta to green. 0 Pressing the [LOLUX/3] button while the multiple clips are selected displays the action selection screen. The following operations can be performed. 0 Appends OK mark together: [Add OK Mark]
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 86
    menus. 0 The menu screen can also be displayed on external monitors connected to the video signal output terminal. (A P101 [ Display On TV ] ) Operation Buttons Use the operation buttons on the side control panel of the camera recorder or the buttons on the LCD monitor to operate the menu. A MENU
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 87
    be changed are displayed in gray and cannot be selected. D Operation Guide Guide for the current operation buttons. E Setting Value Setting values for the (Editing screen) H Remaining Battery Power (A P28 [Power Status Display] ) Memo : 0 If the supplied battery (or equivalent battery sold
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 88
    [Set]/[Store] and press the Set button (R) to confirm the title. 0 Select [Cancel] and press the Set button (R) on the side control panel of the camera recorder to abort character input and return to the previous screen. F [SP] Space Key Select [SP] and press the Set button (R) on the side control
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 89
    M GAIN H AE LEVEL SW Handle Zoom Speed User Switch Set... Camera Process... Detail Master Black Black Toe Knee White Clip Gamma WDR White LCD Backlight LCD Mirror A/V Set... Video Set... Audio Set... System... Record Set... Media... Setup File... Auto Power Off Tally Lamp Reset All Date/Time
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 90
    Menu Menu screen for specifying operation settings during shooting. This item can only be selected in the Camera mode. Bars For setting whether to output color bars. [Setting Values: On, ROff] Memo : 0 The audio test signals (1 kHz) can be output simultaneously with the color bar output. (A P103
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 91
    start, switch). Set according to the shooting conditions. Usable only in the Camera mode. [Setting Values: None, Zebra, Marker, Bars, Focus Assist, OIS set a value in the Lolux mode. [Setting Values: 36dB, R30dB] Clip Review For specifying the operation when any of the [USER1]-[USER7], [LCD KEY▲],
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 92
    or when any of the functions that can be locked is operated regardless of Manual/Auto mode. Preset Zoom Speed For setting the speed to shift to the preset [Setting Values: 1 to 127 (R 64)] Camera Process Menu Menu screen for adjusting the quality of camera images. This item cannot be selected in the
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 93
    areas. Adjust this item according to the condition of the captured video signals. 0 Stretch: Increases the gain of dark areas in an For setting the starting point (knee point) of knee compression when [Knee] is set to "Manual". [Setting Values: R100%, 95%, 90%, 85%] Memo : 0 When [Knee] is set to
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 94
    due to backlight conditions, this function compresses the dynamic range while maintaining image contrast through providing gradation compensation to the input video signals. 0 Strong: Enhances the effect of gradation compensation for object with wide dynamic range due to outdoor or strong backlight
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 95
    Display and Detailed Settings Color Gain For adjusting the video signal color level. Increasing the value deepens the color image. [Setting Values: Rotate, ROff] Reset Process Restores all items in the [Camera Process] menu to their default settings. Detail/Adjust Item V/H Balance For setting the
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 96
    : 0 This item is selectable when the [WHT BAL] switch on the right of the camera recorder is set to "A" or "B". When "PRESET" is set, this item appears as "---" of the recording status. It continues to run even when the power of the camera recorder is turned off. 0 Rec Run: The time code operates
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 97
    display in color, and "Off" to display in black-and-white. [Setting Values: ROn, Off] Memo : 0 The setting of this item is valid only in Camera mode. 0 When this item is set to "Off", only the captured images are displayed in black-and-white. The display and menu screens are displayed
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 98
    ) (A P34 [Adjusting the LCD Monitor and Viewfinder] ) [Setting Values: Mirror, RNormal] Memo : 0 The setting of this item is valid only in Camera mode. 0 During color bar, menu screen and status screen display, the "Mirror" setting is disabled. (A P119 [Color Bar Output] ) Shooting Assist Item
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 99
    Marker and Safety Zone Displays (Camera Mode Only)] ) Memo : 0 During Clip Review or when in the Media ] Focus For setting the display method of the focal length during manual focus. 0 Feet: Displays the focus in feet. 0 Meter: video format during recording or playback. [Setting Values: ROn, Off]
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 100
    . The battery information appears only on the Display 1 screen in Camera mode. (A P112 [Display 1 screen] ) 0 Time: Displays the remaining battery power in minutes. (min) 0 Capacity%: Displays the remaining battery power in percentage. (%) 0 Voltage: Displays the current battery voltage in units
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 101
    ] ) SD Set Up For selecting whether to add a setup signal to the video signal output from the [AV] output terminal. Setup signals are added when "7.5%" is "0.0%" (E model)) Memo : 0 Depending on the menu settings of the camera recorder and the condition of the cable connected to it, the setup signal
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 102
    both the [INPUT1/INPUT2] input terminals are set to "LINE" or "MIC", and both [CH1]/[CH2] of the [CH1/CH2 AUTO/ MANUAL] selection switches are set to "MANUAL". Int. Mic Separation For setting the enhancement level of the stereo effect of the built-in microphone. 0 1 to 4: Enhances the stereo effect
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 103
    For specifying whether to output the audio test signals (1 kHz) during color bar output. [Setting Values set to +side, the audio may be distorted. In this case, reduce the recording level in Manual mode. 0 If the values of multiple frequencies are changed, the specified levels and the actual levels
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 104
    video-related Camera mode and during Clip Review camera recorder is not operated for more than 5 minutes when the battery is used. This function is valid only when the battery is used. [Setting Values: On, ROff] Memo : 0 When both the battery and AC adapter are connected, power from the AC adapter
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 105
    P105 [ Time Zone ] ) 0 This item is not selectable when recording in Camera mode, during Clip Review, and in Media mode. Date/Time For setting the year, month, day, hour, is altered. System Information 9 Version Displays information on the firmware version. 9 Fan Hour For displaying the usage time
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 106
    Menu Display and Detailed Settings 9 Frame & Bit Rate For setting the frame rate and encoding bit rate when [System] is set to "HD". The selectable options vary according to the [Resolution] setting. 0 When "1920x1080" ([Format] is set to "AVCHD") is selected: [Setting Values: 60i(HQ), 50i(HQ), 60i
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 107
    is hidden while the menu screen, status screen or other screen is displayed, the date/time during this period will not be recorded to the video. A confirmation screen appears if you try to display the menu screen or status screen during recording. Clip Set 9 Clip Name Prefix For setting the first
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 108
    Menu). Memo : 0 [Favorites Menu] is only enabled in the Camera mode. [Favorites Menu] remains unchanged even when the recording format changes in the following cases. [USER1 Add] is displayed in gray in the operation guide. 0 Selected item is already added to [Favorites Menu]. 0 Number of menu items
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 109
    Menu Display and Detailed Settings Editing Favorites Menu You can delete or change the order of the items added to [Favorites Menu]. 4 Press the [OIS/2] button. A delete mark (b) appears at the beginning of the menu item. Deleting Items from [Favorites Menu] 1 Open the [Favorites Menu] screen. A
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 110
    Menu Display and Detailed Settings Changing the Order of Items in [Favorites Menu] MENU/THUMB CANCEL DISPLAY 3 Select the menu or submenu item to move and press the Set button (R). The moving mode is activated and a position selection bar for the move appears. 3 MENU/THUMB AE LEVEL CANCEL
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 111
    Menu Display and Detailed Settings 6 Press the [FOCUS ASSIST/1] button. The option menu to exit the [Favorites Menu] editing mode appears. 7 Select [Save & Exit] and press the Set button (R). 7 . Memo : 0 Moving is not complete until the changes are saved with [Save & Exit]. 0 To exit the editing
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 112
    Screen Display Screen in Camera Mode Display 0 screen ) B Voltage/Battery Power Displays the current status of the power supply in use. (A P28 [Power Status Display] ) Memo with a Class 4 SD card inserted. Or when the SD card is not supported. : When attempting to record in 50i(HQ)/50i(SP) to an SD
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 113
    [Rec Mode] menu. (A P106 [ Rec Mode ] ) E Resolution Displays the video image resolution. Memo : 0 This item is not displayed when [Main Menu] B PEAKING 0 . Memo : 0 There is no audio output from the speaker in Camera mode. I Image Stabilizer Mark Displayed when the image stabilizer is ON. i :
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 114
    AE Level 0 Appears when the AE function is activated and [AE Level] in the [Main Menu] B [Camera Function] menu is set to a value other than "Normal". (A P90 [ AE Level ] ) 0 When operated while manual operation is disabled, "AE" blinks for about 5 seconds. 0 When face detection is enabled and [Face
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 115
    Camera] ) W Event/Warning Display Area Displays error messages. (A P128 [Error Messages and Actions] ) X Media Status ---- : No card found in the selected slot STBY : Recording standby RREC : Recording REVIEW : Clip Review (A P68 [Viewing Recorded Videos in the slot : Power OFF Y Dual Rec/
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 116
    status of the power supply in use. (A P28 [Power Status Display] ) Memo : 0 Displayed in the Media Display 0 screen during warnings only. C Resolution Displays the video image resolution. D Frame Rate/Bit Rate Displays the frame rate and bit rate in pairs. E Operation Guide Displays a guide for the
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 117
    the recording location of the video being played back only when GPS information has been recorded. 0 Camera information display displays only the reverse direction (* reverse playback speed: 5x or 15x) : Stop mode : Power OFF M Check Mark Displayed when the currently played clip is selected. N OK
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 118
    using the camera recorder. Audio Level Screen For checking audio related information such as microphone volume level. (A P57 [Audio Recording] ) . USER Switch Set Screen For checking the status (functions assigned) of the user buttons. (A P36 [Assigning Functions to User Buttons] ) . Video Screen
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 119
    output on this camera recorder. Memo : 0 The audio test signals (1 kHz) can be output simultaneously with the color bar output. (A P103 [ Test Tone ] ) The Skin Detail function can be used to reduce the contour enhancement of video signals for only the skin areas so as to produce a smoother skin
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 120
    "Cinema Vivid", and "Cinema Subdued" in [Color Matrix] can be stored individually. (A P94 [ Color Matrix ] ) 1 Select [Color Matrix]/[Adjust] in the [Camera Process] menu. (A P94 [ Adjust ] ) 2 Adjust Hue. 0 Select the color using the cross-shaped button (JK) and confirm using the crossshaped button
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 121
    settings, ranging from video format settings to Camera recorder SD slot A SD slot B : [CAM1] to [CAM4] : [ W 1 ] to [ W 8 ] : [ Y 1 ] to [ Y 8 ] Compatibility o Scene file 0 Only scene files of the GY-HM600 and GY When the inserted SD card is not supported or not formatted. (File name appears as
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 122
    menu screen closes automatically. 5 . 6 Loading is complete. After loading of the file is complete, "Complete" appears on the screen, and the menu screen closes automatically. Camera Features 122
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 123
    Camera Features Deleting Setup Files 1 Display the [Setup File] menu. Select [Main Menu] B [System] B [Setup File] and press the Set button (R). (A P104 [ Setup File ] ) 2 Select [Delete
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 124
    refer to the [User's Guide] of the [JVC ProHD Clip Manager] inside the bundled CDROM. 1 Connect the camera recorder to the PC using camera recorder to Camera mode. Memo : 0 The procedure for disabling the USB connection varies according to the PC in use. For details, refer to the instruction manual
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 125
    When your PC cannot recognize the SD card Confirm and update the OS of your PC. OS Description Windows XP/ Necessary to update to SP2 or Windows XP SP1 higher. Windows XP SP2/ Necessary to download the Windows XP SP3 update software. (KB955704) http://www.microsoft.com/ downloads/details.aspx
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 126
    or playback video images and audio sound to an external monitor, select the output signals from the camera recorder, and DEVICE AV SD/HD B SDI HDMI REMOTE DC Clamp Filter (supplied) INPUT2 INPUT1 DEVICE AV REC REMOTE DC Wire Clamp (supplied) * Select the output signal using [HDMI/SDI Out]
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 127
    A AUX P/OCWHGER REC DEVICE AV HD/SD B SDI HDMI REMOTE DC REMOTE Connect the wired remote control . Caution : 0 Turn off the power of the camera recorder when connecting a wired remote control. . Memo : 0 If both CH1 and CH2 are built-in microphones, stereo sound is output from the
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 128
    and on the power of the camera recorder again. Error Message Display Screen Thumbnail Screen Dedicated Screen TURN POWER - OFF TURN your nearest JVC dealer. 0 The fan stopped running. 0 The power turns off automatically after about 1 second. Please consult your nearest JVC dealer. Usage
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 129
    the card using this is in progress. 0 Card is removed while camera recorder. (A P40 [Restoring the SD formatting is in progress. Card that card for Clip Review. contains clips that can be reviewed. (A P37 [SD Card] ) (A P68 [Viewing Recorded Videos Immediately (Clip Review)] ) NO MEDIA -
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 130
    in the camera recorder. Memo : 0 You can specify whether to turn on the warning tone as well as setting the volume in [A/V Set] B [Audio Set] B [Alarm Level]. (A P103 [ Alarm Level ] ) Troubleshooting Symptom Power does not turn on. Unable to start recording. Action 0 Is the AC adapter properly
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 131
    the Viewfinder] ) The [CH1/CH2] recording level 0 Is the [CH1/CH2 AUTO/MANUAL] switch set to "AUTO"? adjustment knob does not 0 Is the [FULL AUTO] switch user's bit are not displayed. Is the battery too old? 0 Even in Camera mode or Media mode, the time code and user's bit may not be displayed
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 132
    3 kK, XLR (balanced), +48 V output (phantom power supply) +4 dBu, 10 kK, XLR (balanced) [AUX] [AV] terminal 4-pin 3.5 mm mini jack Video signal 1.0 V (p-p) Audio signal -8 dBu ( mm) φ72 mm Camera Section Item Description Image Supported media Slots Description SDHC/SDXC x 2 Others 132
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 133
    Card (U model only) 1 card, 35 Mbps, VBR mode) Instructions 1 HD mode (MOV/MP4: MPEG-2) CD-ROM 1 Video QuickTime File Format (For AC Adapter 1 recording file Final Cut Pro)/MP4 File Format format Power Cord (U model: 1, E model: 2) Video Battery 1 HQ mode MPEG-2 Long GOP VBR, AV
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 134
    Dimensional Outline Drawing (Unit: mm) . 148.5 177.5 156.5 140 415.5 178 197 57 )00% 269.5 345.5 402.5 * The specifications and appearance of this product are subject to changes for further improvement without prior notice. Others 134
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 135
    AC adapter 27, 28 Action 80 Aspect ratio 44 Auto power off 29 B Backup rec 71 Battery 12, 26 Brightness adjustment 48 C Camera mode 17, 32, 112 Charging time 27 Clip continuous rec 73 Clip cutter trig (splitting clips 68 Clip name 41, 79 Clip review rec 77 Video format 43 Viewfinder
  • JVC GY-HM600U | GY-HM600U Instruction Manual (135 pages) - Page 136
    LST1463-001A GY-HM600U/GY-HM600E HD MEMORY CARD CAMERA RECORDER . © 2012 JVC KENWOOD Corporation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
.
HD MEMORY CARD CAMERA RECORDER
GY-HM600U/GY-HM600E
INSTRUCTIONS
.
The specifications and appearance of this product are subject to changes for further improvement
without prior notice.
Please check the latest version of the INSTRUCTIONS from the following Mobile User Guide, or
download the PDF from the URL below.
Mobile User Guide
When you are outside, you can refer to the instructions from your Android phone or
iPhone.
You can view the Mobile User Guide using the browser on your Android phone or
iPhone.
.
Thank you for purchasing this JVC product.
Before operating this unit, please read the
instructions carefully to ensure the best
possible performance.
In this manual, each model number is
described without the last letter (U/E) which
means the shipping destination.
(U: for USA and Canada, E: for Europe)
Only “U” models (GY-HM600U) have been
evaluated by UL.
Please read the following before getting started:
For Customer Use:
Model No.
GY-HM600U
Serial No.
Enter below the Serial No. which is located
on the body.
Retain this information for future reference.
Ver. 3.00