JVC GY-HM600U GY-HM600U Instruction Manual (135 pages) - Page 130
Tally Lamp, Warning Tone, Troubleshooting
![]() |
View all JVC GY-HM600U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Tally Lamp The tally lamp start blinking when the remaining space on the SD card is running out during recording, or when the battery power is running low. Blinking Mode Blinks slowly (once every second) Blinks quickly (2 times per second) Remaining Battery Power/SD Card Space 0 Battery power is low 0 Remaining recording time on SD card is less than 3 minutes (during recording) 0 Remaining recording time on SD card is zero (during recording) 0 Error on the camera recorder Warning Tone 0 Warning tone is output from the monitor speaker and [x] terminal when the battery level is low. 0 Warning tone is also output when an error occurs in the camera recorder. Memo : 0 You can specify whether to turn on the warning tone as well as setting the volume in [A/V Set] B [Audio Set] B [Alarm Level]. (A P103 [ Alarm Level ] ) Troubleshooting Symptom Power does not turn on. Unable to start recording. Action 0 Is the AC adapter properly connected? 0 Is the battery charged? 0 Is the power turned on immediately after it is turned off? Make sure to wait for an interval of at least 5 seconds before turning on the power again. 0 Is the record trigger button/lock switch on the handle turned on? 0 Is the write-protect switch of the SD card turned on? Make sure that the write-protect switch is turned off. (A P37 [Write-Protect Switch on the SD Card] ) 0 Is the camera recorder set to the Camera mode? Use the [MODE] selection button to switch to the Camera mode. (A P16 [Operation Modes] ) Camera image is not output on Is the camera recorder set to the Camera mode? the LCD monitor and Use the [MODE] selection button to switch to the Camera mode. viewfinder screen. (A P16 [Operation Modes] ) Playback does not start after Is the selected clip a playable clip? selecting a clip thumbnail and Playback is not possible if the clip has a different video format setting. pressing the Set button (R). No sound during playback. Is the currently played clip recorded in the Variable Frame Rec mode? (A P77 [Variable Frame Rec] ) Others 130
![](/manual_guide/products/jvc-gyhm600u-gyhm600u-instruction-manual-135-pages-35a44e3/130.png)