JVC GY-HM600U GY-HM600U Instruction Manual (135 pages) - Page 127

Connecting the Headphone Connecting Wired Remote Control 0 Audio output from the [x] terminal can be selected using [Monitor] in the [A/V Set] menu as well as the [MONITOR] switch on the camera recorder. (A P103 [ Monitor ] ) 0 The different combinations of settings that are output from the [x] terminal and monitor speaker are as follows. [MONITOR] Switch Settings [CH1] [Monitor] Settings - [x] terminal LR CH1 Speaker * CH1 [BOTH] [Mix] [Stereo] CH1+CH2 CH1+CH2 CH1 CH2 [CH2] - CH2 CH2 * Audio is output from the speaker only in Media mode. Does not output in the Camera mode. The functions of the camera recorder can be configured using a wired remote control. Memo : 0 When the switches of the camera recorder and remote control unit are operated at the same time, the switch operation of the remote control unit takes priority over that of the camera recorder. 1 Connect a wired remote control to the camera recorder. Connect the wired remote control (sold separately) to the [REMOTE] terminal of this camera recorder. INPUT2 INPUT1 BATT.RELEASE A AUX P/OCWHGER DEVICE AV HD/SD B SDI HDMI REMOTE DC P/OCWHGER INPUT2 INPUT1 AUX REC BATT.RELEASE A AUX P/OCWHGER REC DEVICE AV HD/SD B SDI HDMI REMOTE DC REMOTE Connect the wired remote control . Caution : 0 Turn off the power of the camera recorder when connecting a wired remote control. . Memo : 0 If both CH1 and CH2 are built-in microphones, stereo sound is output from the [x] terminal regardless of the [MONITOR] switch setting and [Monitor] setting. 2 Turn on the power of the camera recorder. Connecting External Devices 127