JVC SR-VD400US Instruction Manual - Page 15
Cable Box Control Setting, Installing Controller
View all JVC SR-VD400US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Cable Box Control Setting Suggested location Place the cable box on top of the VCR. Attach the VCR's Controller to the top of the VCR with the Controller's transmitter pointed towards the cable box's remote sensor. ATTENTION: The Controller can also control a DBS receiver. If both a cable box and a DBS receiver are used, position the Controller so its signal reaches the remote sensors on both the cable box and DBS receiver. Cable box Your VCR Cable box Controller (suggested locations) Controller (supplied) To RF output Transmitter To Audio/video output or EN 15 The following procedure is required if you receive your TV channels through a cable box (descrambler). The Controller allows the VCR to automatically switch the cable box channel during timer recording. The Controller is effective for recording broadcasts that have been programed using VCR Plus+ (੬ pg. 34) or Express timer programing (੬ pg. 38). Installing Controller 1 Situate Controller Place the Controller so that its transmitter is facing the cable box's remote sensor. ● Make sure the path between the Controller and the cable box's remote sensor is not blocked. 2 Attach Controller Fix securely using the adhesive strip attached on the back of the Controller. 3 Connect cable box to VCR ● If your cable box does not have audio/video output connectors Connect the RF output terminal on the cable box to the ANTENNA IN terminal on the rear of your VCR. ● If your cable box has audio/video output connectors Connect an audio/video cable between the AUDIO/VIDEO IN connectors on the rear of the VCR and the audio/video output connectors on the cable box. NOTE: When connecting your cable box, refer to its instruction manual. 4 Connect Controller to VCR Connect the Controller to the CABLE BOX Controller connector on the rear panel. To ANTENNA IN To AUDIO/ VIDEO IN Your VCR CABLE BOX How to control the cable box This VCR has two separate methods to control your cable box. ● The VCR's wireless Remote can control your cable box. This eliminates the need for a separate cable box's Remote. ● The VCR's Controller can also control your cable box. This allows the VCR to change your cable box's channel number during timer recording. Each method must be set up separately. To set up the VCR's Remote, refer to page 71. To set up the Controller, go to page 16.