JVC SR-VD400US Instruction Manual - Page 68
S-VIDEO/ VIDEO Connections
View all JVC SR-VD400US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
68 EN S-VIDEO/ VIDEO Connections Various connection for editing tapes The following three methods can be used for editing tapes. ● VHS to S-VHS editing (VIDEO-VIDEO connection): Although the picture quality is inherently limited by the original VHS quality, the edited tape has better picture quality than those made by VHS-to-VHS editing. ● S-VHS to VHS editing (VIDEO-VIDEO connection): Since the original source is recorded in S-VHS mode, the edited tape has better picture quality than those made by VHS-to-VHS editing. ● S-VHS to S-VHS editing (S-VIDEO connection): Original picture quality of S-VHS made can be duplicated with minimal picture degradation. This is the best editing method you can use on S-VHS VCRs. EDITING (cont.) B You can use your VCR as the playback or recording VCR. Ex. When using this VCR as the recording VCR This VCR (for recording) CABLE BOX REMOTE PAUSE/ AV COMPULINK OUT Y PB/CB S VIDEO PR/CR COMPONENT VIDEO OUT IN IN(L-1) S VIDEO R AUDIO L VIDEO R AUDIO L VIDEO IN(L-2) VHF/UHF ANTENNA IN ANTENNA OUT i.LINK IN/OUT DV IN S400 DIGITAL OUT OPTICAL PCM/DOLBY DIGITAL D THEATER REGION 1 To AUDIO OUT To Audio Input To S-video Input Audio cable (supplied) To S VIDEO OUT S-video cable (supplied) A You can use a camcorder as the playback device and your VCR as the recording VCR. This VCR (for recording) IN F-1 + To AUDIO Input Audio cable (supplied) To rear panel REMOTE PAUSE/ AV COMPULINK connector To S-VIDEO Input S-video cable (supplied) Mini-plug cable (not supplied) (JVC camcorder only) To Audio output Another VCR (for playback) 1 Make connections A Connection with the camcorder Connect an audio/S-video cable between the camcorder's audio/S-video output connectors and your VCR's audio/S-video input connectors. ● When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the camcorder. Connect the mini-plug cable (not supplied with this VCR) as illustrated on the left. ●When using a camcorder with a monaural output, connect the audio output connector on the camcorder to the left audio input connector on this VCR. NOTE: If the camcorder does not have S-video output connector, use a video cable. To S-video output To EDIT Camcorder (for playback)