JVC SR-VD400US Instruction Manual - Page 34
TIMER RECORDING, VCR Plus+R Timer Programing
View all JVC SR-VD400US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
34 EN VCR Plus+® Timer Programing ● Turn on the VCR and the TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". POWER 1 IN F-1 + TIMER ( ) VCR CABLE TV /DBS 2 5 3 DAILY POWER 8 TIMER ( ) 6 WEEKLY 3 4 BACK 7 TIMER RECORDING Timer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 24 timer recording programs can be made using VCR Plus+ timer programing or Express timer programing method (੬ pg. 38) as far as a year in advance. The VCR Plus+ timer programing system eliminates the need to input channel, date, start and stop time data when programing timer recording settings. Simply key in the PlusCode number for the TV broadcast you wish to record and the VCR's timer will be automatically programed. (The PlusCode programing numbers are the numbers next to the program in most TV listing.) 1 Load a cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR. ● The VCR turns on, and the counter is reset, automatically. 2 Access VCR Plus+ screen Press PROGRAM on TIMER PROGRAM the Remote. PLUSCODE NUMBER SET ● The clock must be set to access the VCR Plus+ screen. If you have not set the clock, the Main SET PROG. PRESS NUMBER KEYS [0-9] OR EXIT START STOP DATE CH PRESS [+/-] TO SET EXPRESS PROGRAMMING Menu screen appears after an error message is displayed. Refer to page 10 for the clock setting procedure. 3 Enter PlusCode number Press the appropriate Number keys to input the PlusCode number printed in the TV listings for the TV broadcast you wish to record, then press OK. TIMER PROGRAM PLUSCODE NUMBER SET 1 2 3 4 5 SET PROG. PRESS NUMBER KEYS [0-9] OR EXIT START STOP DATE CH PRESS [+/-] TO SET EXPRESS PROGRAMMING Then; If the Guide Channel Set screen appears - go to step 4. If the VCR Plus+ Program screen appears - go to step 5. ● To make corrections, press CANCEL and input the correct PlusCode number. ● If an incorrect PlusCode number or the one for a broadcast already finished has been inputted, "PLUSCODE NO. ERROR CONFIRM PLUSCODE NO. THEN RETRY" is displayed for about 5 seconds, then the VCR Plus+ screen reappears.