JVC SR-VD400US Instruction Manual - Page 41
Other Useful functions for timer recording, ATTENTION, Pattern 1
View all JVC SR-VD400US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
ATTENTION If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded. Pattern 1: The program with the lower program number will be recorded. 10:00 Program 1 Program 2 11:00 CH10 CH40 12:00 Not recorded Pattern 2: The program starting earlier will be recorded. 10:00 Program 1 11:00 CH10 Program 2 CH40 12:00 Not recorded Pattern 3: The program starting earlier will be recorded, followed by the remaining portion of the other program. 10:00 Program 1 11:00 CH10 Program 2 12:00 CH40 Not recorded EN 41 Other Useful functions for timer recording You can also use the following functions for timer recording. ● Auto Timer (੬ pg. 59) When "AUTO TIMER" is set to "ON", the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER (‰) to engage or disengage the timer recording standby mode. ● Auto SP = EP Timer (S-VHS/VHS only) (੬ pg. 59) If there is not enough tape to record the entire broadcast for recording in SP mode, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when recording a broadcast of more than 2 hours in length.