JVC SR-VD400US Instruction Manual - Page 24
Automatic operations after rewinding — Next Function Memory
View all JVC SR-VD400US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
24 EN BASIC PLAYBACK AND RECORDING (cont.) E Automatic operations after rewinding - Next Function Memory The Next Function Memory "tells" the VCR what to do after rewinding is complete. ● Ensure that the VCR is in stop mode. a- For Automatic Playback Start Press REW ( 1 ), then press PLAY ( 3 ) within 2 seconds. b- For Automatic Power Off Press REW ( 1 ), then press POWER within 2 seconds. c- For Automatic Timer Standby Press REW ( 1 ), then press TIMER (‰) within 2 seconds. NOTE: It is not possible to select the Automatic Timer Standby function if the cassette's record safety tab is removed. F Locating beginning of recordings - Index Search When recording on this VCR, index codes are placed on the tape at the beginning of each recording. You can find and automatically play back from the beginning of any recording using the Index Search function. 1 Start search While the tape is not running, press 4 or ¢ on the Remote. 2 Access distant code To access a recording of 2 to 9 index codes away, press 4 or ¢ repeatedly until the correct number is displayed on the screen (only if "SUPERIMPOSE" is set to "ON" (੬ pg. 59)). Playback begins automatically when the desired recording is located. Beginning of the current program recorded Previous program recorded -2 -1 4 Current position Beginning of the 2nd next on the tape program recorded Next program recorded 2nd next 1 2 3 ¢ ● If you want to find the very beginning of the desired program, press REW ( ) or FF ( ) after playback starts. NOTE: An index code is not placed on the tape when recording is resumed from recording pause. G Skipping unwanted portions - Skip Search You can skip over (view at high speed) unwanted portions of the tape. Press SKIP SEARCH on the Remote once to 4 times during playback. Each press initiates a 30-second period of high speed playback (up to 2 minutes). When the specified portion of the tape is skipped, normal playback resumes automatically. To return to normal playback during Skip Search, press PLAY ( 3 ). NOTE: It is not possible to perform the Skip Search when you play back a D-VHS tape recorded in LS5 mode. Other Useful functions for playback (S-VHS/VHS only) You can also use the following functions for playback. ● Video Calibration (੬ pg. 56) When this function is set to "ON", this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highestpossible pictures. ● Picture Control (੬ pg. 56) This function helps you to adjust the playback picture quality according to your preference. ● Digital R3 (੬ pg. 56) This function applies edge correction to the luminance signal to enhance details and provides clear pictures. ● Video Stabilizer (੬ pg. 56) You can automatically correct vertical vibrations in the picture when playing back unstable recordings made on another VCR. H Repeating wanted portions - Skip Back You can skip back (view at high speed) wanted portions of the tape. Press Number key (1, 2 or 3) on the Remote during playback. Each press initiates specified portion period of high speed rewind. When the specified portion of the tape is rewound, normal playback resumes automatically. Number key 1 2 3 Rewind Time about 05 seconds about 10 seconds about 30 seconds