JVC SR-VD400US Instruction Manual - Page 22
Basic Playback Features, Checking tape position, Playing back tape repeatedly — Repeat Playback
View all JVC SR-VD400US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
22 EN Basic Playback Features ● Turn on the VCR and the TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". B IN F-1 + BASIC PLAYBACK AND RECORDING (cont.) A Checking tape position The tape position indicator appears on the screen in the B E following cases: ● When you change the VCR operation mode from the stop mode to fast forward or rewind mode. ● When you perform an Index Search (੬ pg. 24). The position of " " in relation to "B" (Beginning) or "E" (End) shows you where you are on the tape. NOTES: ● "SUPERIMPOSE" must be set to "ON", or the indicator will not appear (੬ pg. 59). ● It may take a few seconds for the tape position indicator to be displayed. To reset the time counter, press C. RESET on the Remote. The counter reading becomes "0:00:00". It is also reset when a tape is inserted. VCR CABLE TV /DBS C B Playing back tape repeatedly - Repeat Playback You can play back a tape repeatedly (50 times). While playing back a tape, press and hold PLAY ( 3 ) for more than 5 seconds. The play indicator ( # ) on the front display panel starts flashing slowly, and a tape will be played back 50 times. To stop playback, press STOP ( 7 ) on the Remote or STOP/EJECT ( 7/0 ) on the front panel. C NOTE: For a cassette recorded in D-VHS mode, Repeat Playback is not possible if the cassette was recorded in LS3 or LS5 mode. B D