JVC SR-VD400US Instruction Manual - Page 76
Timer Recording, Troubleshooting Cont.
View all JVC SR-VD400US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
76 EN TROUBLESHOOTING (cont.) TIMER RECORDING SYMPTOM 7. Satellite channels are not automatically switched during timer recording. 8. Timer recording begins as scheduled, but the channel is always incorrect. 9. You moved, and now VCR Plus+ system does not work properly. 10."PROGRAM FULL" is displayed on the screen. POSSIBLE CAUSE ● The Controller is not properly connected to the VCR. ● The input channel selected on the DBS Receiver Set screen is incorrect. ● The VCR is not set correctly to control the DBS receiver. ● The DBS receiver is turned off. ● Even though you do not use an external cable box or DBS receiver, on the Cable Set Up screen or DBS Receiver Set screen, "INPUT CH" is set to "ON". ● The receivable stations in the new area are received on different channels than those in the previous area. ● All 24 programs of the VCR's timer memory are used. CORRECTIVE ACTION Connect the Controller correctly (੬ pg. 18). After confirming your DBS receiver's input channel number, re-access the DBS Receiver Set screen and select the correct number (੬ pg. 19). Set the correct DBS receiver brand code (੬ pg. 20). Make sure the power is on before timer recording starts. Set "INPUT CH" to "OFF" (੬ pg. 16, 19). Re-perform the Changing VCR Plus+ Setting procedure (੬ pg. 36). Wait until a space in memory clears, or cancel unnecessary program information (੬ pg. 40).