JVC SR-VD400US Instruction Manual - Page 37

1 Access Main Menu screen Press MENU. 2 Access Guide Channel Set screen 1 Press @ # move FUNCTION SET UP TUNER SET UP INITIAL SET UP the arrow to CLOCK SET GUIDE CHANNEL OTHER "INITIAL SET GUIDE CH 6 VCR CH UP", then press fi - - 2 or OK. Press @ # to move MENU the arrow to EXIT OK SELECT WITH ARROW KEYS SELECT THEN PRESS [OK] "GUIDE CHANNEL", then press fi or OK. 3 Input guide channel number Press @ # to input the VCR Plus+ guide channel number as (Ex.) When inputting the guide channel number 6 for WNJU(Ind.) shown in the TV listing. ● If you receive your channels with a FUNCTION SET UP TUNER SET UP INITIAL SET UP CLOCK SET GUIDE CHANNEL OTHER GUIDE CH 6 VCR CH - - cable box and if you have properly MENU OK SELECT WITH ARROW KEYS EXIT SELECT THEN PRESS [OK] set your Controller, "CABLE CH" appears in place of "VCR CH". If not, refer to pages 15 - 17 and re-perform the procedure. In that case, it is possible to change the channel by 10 channels by pressing and holding @ # in steps 3 and 4. EN 37 4 Input receiving channel number Press %fi to move the arrow to "VCR CH", then press @ # to input the number of the channel on which the guide channel's broadcasts are received. ● Repeat steps 3 and 4 for each instance. (Ex.) If WNJU(Ind.) is received on channel 47 FUNCTION SET UP TUNER SET UP INITIAL SET UP CLOCK SET GUIDE CHANNEL OTHER GUIDE CH 6 VCR CH 47 MENU OK SELECT WITH ARROW KEYS EXIT SELECT THEN PRESS [OK] 5 Return to normal screen Press MENU.