JVC SR-VD400US Instruction Manual - Page 29
Watching one program while recording another, Showing on-screen display, Engage TV mode
View all JVC SR-VD400US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
VCR CABLE TV /DBS D EN 29 C Watching one program while recording another 1 Engage TV mode During recording... ● Change the TV's input mode from AV to TV. 2 Select channel for viewing Select the channel you want to watch, on the TV. D Showing on-screen display When "SUPERIMPOSE" is set to "ON" (੬ pg. 59), you can see the current VCR status on the TV screen. ● For more detailed information about the on-screen display, see page 87. 1 Display VCR status on TV screen During recording or recording pause, press OSD on the Remote. D-VHS INDEX -9 B E D-VHS STD L R 12:00 AM HD CH 123 SAP STEREO All indications corresponding to the current VCR status are displayed for 5 seconds. The time counter remains on the screen indicating the elapsed time. ● The indications are not recorded. 2 Exit on-screen display Press OSD again. NOTES: ● The subtitles does not appear while the on-screen display is displayed. ● If the VCR is in recording pause mode, "¶8" is always displayed. ● The VCR status can be also displayed during playback. ● Even if "SUPERIMPOSE" is set to "OFF" (੬ pg. 59), the on- screen display appears when the VCR plays back the blank portion of a tape and the VCR receives the channel which has no broadcast. However, on-screen display does not appear when the input location is selected and no signal is input.